[tulip] EtherExpress PRO/100 Cardbus 32

Donald Becker becker@scyld.com
Thu, 8 Mar 2001 18:46:48 -0500 (EST)

On Thu, 8 Mar 2001, Ronneil Camara wrote:

> >> Run the driver with debug=3 to see the media selection status.
> > Here is the output of tulip-diag debug=3
>> The driver module, rather than the diag program.
> I will try that but as far as i know, i'm using cd_enabler and tulip_cb
> modules

Doh! Zoned on that one.  It goes in /etc/pcmcia/config

    module "cb_enabler", "pci-scan", "cb_shim", "tulip"  opts "debug=3"


device "tulip_cb"
  class "network" module "cb_enabler", "tulip_cb" opts "debug=3"

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993