[tulip] EtherExpress PRO/100 Cardbus 32

[Ronneil Camara]

Hi Donald,

Here is the output of tulip-diag debug=3
------------------------------------------
Tulip-diag.c:v2.06 1/8/2001 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a Digital DS21143 Tulip adapter at 0x200.
 Port selection is 100mbps-SYM/PCS 100baseTx scrambler, full-duplex.
 Transmit started, Receive started, full-duplex.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit threshold is 128.
  The NWay status register is 41e1d2cd.
You have an Intel CardBus card with an incomplete EEPROM.
The station address is 00:a0:c9:37:f9:b0
New EEPROM contents would be:
  8086 0001 0087 0000 0000 0000 0000 0000
  00c4 0103 a000 37c9 b0f9 1e00 0000 0800
  8604 0002 08af 00a5 0286 af04 a508 8800
  0304 08af 00a5 8061 0488 af05 a508 6100
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 ea8d
 ID CRC 0xc4 (vs. 0xc4), complete CRC ea8d.
  Internal autonegotiation state is 'Negotiation complete'.
 Use '-a' or '-aa' to show device registers,
     '-e' to show EEPROM contents, -ee for parsed contents,
  or '-m' or '-mm' to show MII management registers.

-----Original Message-----
From: Donald Becker [mailto:becker@scyld.com]
Sent: Wednesday, March 07, 2001 10:15 PM
To: Ronneil Camara
Cc: tulip@scyld.com
Subject: RE: [tulip] EtherExpress PRO/100 Cardbus 32


Run the driver with debug=3 to see the media selection status.

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993