[tulip] IS LINKSYS 10/100 CARD DETECTED?
Joek
kaloke1@moneyline.com
Tue, 6 Mar 2001 08:58:38 -0500
This is a multi-part message in MIME format.
------=_NextPart_000_0005_01C0A61B.A25214F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
HI
I am setting up a new Linux system using Mandrake 7.2 and I have a =
Linksys Etherfast 10/100 PCI LAN Card. Before I get into configuring it =
I want to verify that the card is being detected.
Below, I have the output of "dmesg" and the "cat /proc/pci" after =
booting Linux Mandrake. In /proc/pci it seems to indicate an unknown =
vender. I am not sure if the card is detected. At this point, I added a =
line "tulip" in the /etc/modules file. That is the only change I made to =
the system regarding tulip. I highlighted the references to the Ethernet =
card below..
Is it fully detected and ready to be configured? Does "unknown vender" =
in /proc/pci mean that there is a problem?
I appreciate any help..
Joe Koziatek
jkoziate@home.com
#########################################################################=
#######
########################### DMESG AFTER BOOTING =
##############################
#########################################################################=
#######
Linux version 2.2.17-21mdk (chmou@no.mandrakesoft.com) (gcc version =
2.95.3 19991030 (prerelease)) #1 Thu Oct 5 13:16:08 CEST 2000
Detected 400913 kHz processor.
ide_setup: hdd=3Dide-scsi
Console: colour dummy device 80x25
Calibrating delay loop... 799.54 BogoMIPS
Memory: 257376k/262080k available (1136k kernel code, 416k reserved, =
3024k data, 128k init, 0k bigmem)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium II (Deschutes) stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=3D1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5=20
vesafb: framebuffer at 0xe4000000, mapped to 0xd0009000, size 8192k
vesafb: mode is 800x600x16, linelength=3D1600, pages=3D7
vesafb: protected mode interface info at c000:4785
vesafb: scrolling: redraw
vesafb: directcolor: size=3D0:5:6:5, shift=3D0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq =3D 4) is a 16550A
ttyS01 at 0x02f8 (irq =3D 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with =
idebus=3Dxx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD200BB-00AUA1, ATA DISK drive
hdb: CD-ROM Drive/G6D, ATAPI CDROM drive
hdc: WDC WD102AA, ATA DISK drive
hdd: IOMEGA ZIPCD3840INT-A, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC WD200BB-00AUA1, 19092MB w/2048kB Cache, CHS=3D2434/255/63
hdc: WDC WD102AA, 9787MB w/2048kB Cache, CHS=3D19885/16/63
hdb: ATAPI 56X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=3D256, MAX_REAL=3D12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 906.018 MB/sec
p5_mmx : 923.163 MB/sec
8regs : 695.325 MB/sec
32regs : 410.337 MB/sec
using fastest function: p5_mmx (923.163 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) =3D 4096
Partition check:
hda: hda1 hda2 hda3 hda4
hdc: [PTBL] [1027/255/63] hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 > hdc3 =
hdc4
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 128k freed
Adding Swap: 32124k swap-space (priority -1)
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: IOMEGA Model: ZIPCD3840INT-A Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
#########################################################################=
##
#########################################################################=
##
## tulip.c:v0.92l 8/19/2000 Written by Donald Becker =
<becker@scyld.com>
## http://www.scyld.com/network/tulip.html
## eth0: ADMtek Comet rev 17 at 0xd0820000, 00:20:78:1D:A8:1B, IRQ 10.
## eth0: MII transceiver #1 config 3000 status 7869 advertising 01e1.
#########################################################################=
##
#########################################################################=
##
Creative EMU10K1 PCI Audio Driver, version 0.6, 13:20:10 Oct 5 2000
emu10k1: EMU10K1 rev 5 model 0x8023 found, IO at 0xe400-0xe41f, IRQ 10
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.232 $ time 13:21:03 Oct 5 2000
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: Intel USB controller: setting latency timer to 0
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven =
operation.
parport_probe: failed
parport0: no IEEE-1284 device present.
lp0: using parport0 (polling).
#########################################################################=
#########
########################## CAT /PROC/PCI =
######################################
#########################################################################=
#########
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (rev 2).
Medium devsel. Master Capable. Latency=3D64. =20
Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
Bus 0, device 1, function 0:
PCI bridge: Intel 440BX - 82443BX AGP (rev 2).
Medium devsel. Master Capable. Latency=3D64. Min Gnt=3D136.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No =
bursts. =20
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. =
Latency=3D64. =20
I/O at 0xf000 [0xf001].
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 10. Master =
Capable. No bursts. =20
I/O at 0xe000 [0xe001].
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable. =20
Bus 0, device 9, function 0:
Multimedia audio controller: Unknown vendor Unknown device (rev 5).
Vendor id=3D1102. Device id=3D2.
Medium devsel. Fast back-to-back capable. IRQ 10. Master =
Capable. Latency=3D64. Min Gnt=3D2.Max Lat=3D20.
I/O at 0xe400 [0xe401].
Bus 0, device 9, function 1:
Input device controller: Unknown vendor Unknown device (rev 5).
Vendor id=3D1102. Device id=3D7002.
Medium devsel. Fast back-to-back capable. Master Capable. =
Latency=3D64. =20
I/O at 0xe800 [0xe801].
#########################################################################=
########################
#########################################################################=
########################
## Bus 0, device 13, function 0:
## Ethernet controller: Unknown vendor Unknown device (rev 17).
## Vendor id=3D1317. Device id=3D985.
## Medium devsel. Fast back-to-back capable. IRQ 10. Master =
Capable. Latency=3D64. Min Gnt=3D255.Max Lat=3D255.
## I/O at 0xec00 [0xec01].
## Non-prefetchable 32 bit memory at 0xe9000000 [0xe9000000].
#########################################################################=
########################
#########################################################################=
########################
Bus 1, device 0, function 0:
VGA compatible controller: ATI Mach64 GB (rev 92).
Medium devsel. Fast back-to-back capable. IRQ 11. Master =
Capable. Latency=3D64. Min Gnt=3D8.
Non-prefetchable 32 bit memory at 0xe4000000 [0xe4000000].
I/O at 0xd000 [0xd001].
Non-prefetchable 32 bit memory at 0xe6000000 [0xe6000000].
------=_NextPart_000_0005_01C0A61B.A25214F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2314.1000" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>HI</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>I am setting up a new Linux system =
using Mandrake=20
7.2 and I have a Linksys Etherfast 10/100 PCI LAN Card. Before I get =
into=20
configuring it I want to verify that the card is being =
detected.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Below, I have the output of "dmesg" and =
the "cat=20
/proc/pci" after booting Linux Mandrake. In /proc/pci it seems to =
indicate an=20
unknown vender. I am not sure if the card is detected. At=20
this point, I added a line "tulip" in the /etc/modules file. That =
is the=20
only change I made to the system regarding tulip. I highlighted the =
references=20
to the Ethernet card below..</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Is it fully detected and ready to =
be=20
configured? Does "unknown vender" in /proc/pci mean that there =
is a=20
problem?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I appreciate any help..</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Joe Koziatek</FONT></DIV>
<DIV><FONT face=3DArial size=3D2><A=20
href=3D"mailto:jkoziate@home.com">jkoziate@home.com</A></FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial=20
size=3D2>################################################################=
################<BR>###########################=20
DMESG AFTER=20
BOOTING ##############################<BR>##########################=
######################################################</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Linux version 2.2.17-21mdk (<A=20
href=3D"mailto:chmou@no.mandrakesoft.com">chmou@no.mandrakesoft.com</A>) =
(gcc=20
version 2.95.3 19991030 (prerelease)) #1 Thu Oct 5 13:16:08 CEST=20
2000<BR>Detected 400913 kHz processor.<BR>ide_setup: =
hdd=3Dide-scsi<BR>Console:=20
colour dummy device 80x25<BR>Calibrating delay loop... 799.54=20
BogoMIPS<BR>Memory: 257376k/262080k available (1136k kernel code, 416k =
reserved,=20
3024k data, 128k init, 0k bigmem)<BR>Dentry hash table entries: 32768 =
(order 6,=20
256k)<BR>Buffer cache hash table entries: 262144 (order 8, =
1024k)<BR>Page cache=20
hash table entries: 65536 (order 6, 256k)<BR>VFS: Diskquotas version =
dquot_6.4.0=20
initialized<BR>Intel machine check architecture supported.<BR>Intel =
machine=20
check reporting enabled on CPU#0.<BR>CPU: Intel Pentium II (Deschutes) =
stepping=20
02<BR>Checking 386/387 coupling... OK, FPU using exception 16 error=20
reporting.<BR>Checking 'hlt' instruction... OK.<BR>POSIX conformance =
testing by=20
UNIFIX<BR>mtrr: v1.35a (19990819) Richard Gooch (<A=20
href=3D"mailto:rgooch@atnf.csiro.au">rgooch@atnf.csiro.au</A>)<BR>PCI: =
PCI BIOS=20
revision 2.10 entry at 0xfb230, last bus=3D1<BR>PCI: Using configuration =
type=20
1<BR>PCI: Probing PCI hardware<BR>Linux NET4.0 for Linux 2.2<BR>Based =
upon=20
Swansea University Computer Society NET3.039<BR>NET4: Unix domain =
sockets 1.0=20
for Linux NET4.0.<BR>NET4: Linux TCP/IP 1.0 for NET4.0<BR>IP Protocols: =
ICMP,=20
UDP, TCP, IGMP<BR>TCP: Hash tables configured (ehash 262144 bhash=20
65536)<BR>Initializing RT netlink socket<BR>Starting kswapd v 1.5 =
<BR>vesafb:=20
framebuffer at 0xe4000000, mapped to 0xd0009000, size 8192k<BR>vesafb: =
mode is=20
800x600x16, linelength=3D1600, pages=3D7<BR>vesafb: protected mode =
interface info at=20
c000:4785<BR>vesafb: scrolling: redraw<BR>vesafb: directcolor: =
size=3D0:5:6:5,=20
shift=3D0:11:5:0<BR>Console: switching to colour frame buffer device=20
100x37<BR>fb0: VESA VGA frame buffer device<BR>Detected PS/2 Mouse=20
Port.<BR>Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ=20
enabled<BR>ttyS00 at 0x03f8 (irq =3D 4) is a 16550A<BR>ttyS01 at 0x02f8 =
(irq =3D 3)=20
is a 16550A<BR>pty: 256 Unix98 ptys configured<BR>apm: BIOS version 1.2 =
Flags=20
0x07 (Driver version 1.13)<BR>Real Time Clock Driver v1.09<BR>RAM disk =
driver=20
initialized: 16 RAM disks of 4096K size<BR>Uniform Multi-Platform =
E-IDE=20
driver Revision: 6.30<BR>ide: Assuming 33MHz system bus speed for PIO =
modes;=20
override with idebus=3Dxx<BR>PIIX4: IDE controller on PCI bus 00 dev =
39<BR>PIIX4:=20
chipset revision 1<BR>PIIX4: not 100% native mode: will probe irqs=20
later<BR> ide0: BM-DMA at 0xf000-0xf007, BIOS =
settings:=20
hda:pio, hdb:pio<BR> ide1: BM-DMA at 0xf008-0xf00f, =
BIOS=20
settings: hdc:pio, hdd:pio<BR>hda: WDC WD200BB-00AUA1, ATA DISK =
drive<BR>hdb:=20
CD-ROM Drive/G6D, ATAPI CDROM drive<BR>hdc: WDC WD102AA, ATA DISK =
drive<BR>hdd:=20
IOMEGA ZIPCD3840INT-A, ATAPI CDROM drive<BR>ide0 at 0x1f0-0x1f7,0x3f6 on =
irq=20
14<BR>ide1 at 0x170-0x177,0x376 on irq 15<BR>hda: WDC WD200BB-00AUA1, =
19092MB=20
w/2048kB Cache, CHS=3D2434/255/63<BR>hdc: WDC WD102AA, 9787MB w/2048kB =
Cache,=20
CHS=3D19885/16/63<BR>hdb: ATAPI 56X CD-ROM drive, 128kB Cache<BR>Uniform =
CD-ROM=20
driver Revision: 3.11<BR>Floppy drive(s): fd0 is 1.44M<BR>FDC 0 is a =
post-1991=20
82077<BR>md driver 0.90.0 MAX_MD_DEVS=3D256, MAX_REAL=3D12<BR>raid5: =
measuring=20
checksumming speed<BR>raid5: MMX detected, trying high-speed MMX =
checksum=20
routines<BR> pII_mmx : 906.018=20
MB/sec<BR> p5_mmx : 923.163=20
MB/sec<BR> 8regs : =
695.325=20
MB/sec<BR> 32regs : 410.337=20
MB/sec<BR>using fastest function: p5_mmx (923.163 MB/sec)<BR>scsi : 0=20
hosts.<BR>scsi : detected total.<BR>md.c: sizeof(mdp_super_t) =3D=20
4096<BR>Partition check:<BR> hda: hda1 hda2 hda3 hda4<BR> hdc: =
[PTBL]=20
[1027/255/63] hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 > hdc3=20
hdc4<BR>autodetecting RAID arrays<BR>autorun ...<BR>... autorun =
DONE.<BR>VFS:=20
Mounted root (ext2 filesystem) readonly.<BR>Freeing unused kernel =
memory: 128k=20
freed<BR>Adding Swap: 32124k swap-space (priority -1)<BR>scsi0 : SCSI =
host=20
adapter emulation for IDE ATAPI devices<BR>scsi : 1 host.<BR> =
Vendor:=20
IOMEGA Model: ZIPCD3840INT-A Rev:=20
1.04<BR> Type: =20
CD-ROM &=
nbsp; &n=
bsp; =20
ANSI SCSI revision: 02<BR>Detected scsi CD-ROM sr0 at scsi0, channel 0, =
id 0,=20
lun 0<BR>sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda=20
tray<BR>#################################################################=
##########<BR>###########################################################=
################<BR>## tulip.c:v0.92l=20
8/19/2000 Written by Donald Becker <<A=20
href=3D"mailto:becker@scyld.com">becker@scyld.com</A>><BR>## &nbs=
p; <A=20
href=3D"http://www.scyld.com/network/tulip.html">http://www.scyld.com/net=
work/tulip.html</A><BR>## =20
eth0: ADMtek Comet rev 17 at 0xd0820000, 00:20:78:1D:A8:1B, IRQ =
10.<BR>## =20
eth0: MII transceiver #1 config 3000 status 7869 advertising=20
01e1.<BR>################################################################=
###########<BR>##########################################################=
#################<BR>Creative=20
EMU10K1 PCI Audio Driver, version 0.6, 13:20:10 Oct 5 =
2000<BR>emu10k1:=20
EMU10K1 rev 5 model 0x8023 found, IO at 0xe400-0xe41f, IRQ 10<BR>usb.c:=20
registered new driver usbdevfs<BR>usb.c: registered new driver=20
hub<BR>usb-uhci.c: $Revision: 1.232 $ time 13:21:03 Oct 5=20
2000<BR>usb-uhci.c: High bandwidth mode enabled<BR>usb-uhci.c: Intel USB =
controller: setting latency timer to 0<BR>usb-uhci.c: USB UHCI at I/O =
0xe000,=20
IRQ 10<BR>usb-uhci.c: Detected 2 ports<BR>usb.c: new USB bus registered, =
assigned bus number 1<BR>usb.c: USB new device connect, assigned device =
number=20
1<BR>hub.c: USB hub found<BR>hub.c: 2 ports detected<BR>parport0: =
PC-style at=20
0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2]<BR>parport0: detected irq 7; use =
procfs to=20
enable interrupt-driven operation.<BR>parport_probe: failed<BR>parport0: =
no=20
IEEE-1284 device present.<BR>lp0: using parport0 (polling).</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial=20
size=3D2>################################################################=
##################<BR>########################## =20
CAT /PROC/PCI =20
######################################<BR>###############################=
###################################################<BR>PCI=20
devices found:<BR> Bus 0, device 0, =
function =20
0:<BR> Host bridge: Intel 440BX - 82443BX Host (rev=20
2).<BR> Medium devsel. Master =
Capable. =20
Latency=3D64. <BR> Prefetchable 32 =
bit memory=20
at 0xe0000000 [0xe0000008].<BR> Bus 0, device 1, =
function 0:<BR> PCI bridge: Intel 440BX - =
82443BX AGP=20
(rev 2).<BR> Medium devsel. Master=20
Capable. Latency=3D64. Min Gnt=3D136.<BR> Bus 0, =
device 7, function 0:<BR> ISA =
bridge: Intel=20
82371AB PIIX4 ISA (rev 2).<BR> Medium=20
devsel. Fast back-to-back capable. Master Capable. No=20
bursts. <BR> Bus 0, device 7, =
function =20
1:<BR> IDE interface: Intel 82371AB PIIX4 IDE (rev=20
1).<BR> Medium devsel. Fast =
back-to-back=20
capable. Master Capable. Latency=3D64. =20
<BR> I/O at 0xf000 [0xf001].<BR> =
Bus =20
0, device 7, function 2:<BR> USB =
Controller:=20
Intel 82371AB PIIX4 USB (rev 1).<BR> =
Medium=20
devsel. Fast back-to-back capable. IRQ 10. Master=20
Capable. No bursts. <BR> I/O =
at 0xe000=20
[0xe001].<BR> Bus 0, device 7, function =20
3:<BR> Bridge: Intel 82371AB PIIX4 ACPI (rev=20
2).<BR> Medium devsel. Fast =
back-to-back=20
capable. <BR> Bus 0, device 9, =
function =20
0:<BR> Multimedia audio controller: Unknown vendor =
Unknown=20
device (rev 5).<BR> Vendor id=3D1102. =
Device=20
id=3D2.<BR> Medium devsel. Fast =
back-to-back=20
capable. IRQ 10. Master Capable. Latency=3D64. =
Min=20
Gnt=3D2.Max Lat=3D20.<BR> I/O at 0xe400=20
[0xe401].<BR> Bus 0, device 9, function =20
1:<BR> Input device controller: Unknown vendor Unknown =
device=20
(rev 5).<BR> Vendor id=3D1102. Device=20
id=3D7002.<BR> Medium devsel. Fast=20
back-to-back capable. Master Capable. Latency=3D64. =20
<BR> I/O at 0xe800=20
[0xe801].<BR>############################################################=
#####################################<BR>################################=
#################################################################<BR>##&n=
bsp;=20
Bus 0, device 13, function 0:<BR>## =
Ethernet=20
controller: Unknown vendor Unknown device (rev=20
17).<BR>## Vendor id=3D1317. Device=20
id=3D985.<BR>## Medium devsel. Fast=20
back-to-back capable. IRQ 10. Master Capable. =20
Latency=3D64. Min Gnt=3D255.Max =
Lat=3D255.<BR>## =20
I/O at 0xec00 [0xec01].<BR>## =
Non-prefetchable 32=20
bit memory at 0xe9000000=20
[0xe9000000].<BR>########################################################=
#########################################<BR>############################=
#####################################################################<BR>=
=20
Bus 1, device 0, function =
0:<BR> VGA=20
compatible controller: ATI Mach64 GB (rev =
92).<BR> =20
Medium devsel. Fast back-to-back capable. IRQ 11. =
Master=20
Capable. Latency=3D64. Min =
Gnt=3D8.<BR> =20
Non-prefetchable 32 bit memory at 0xe4000000=20
[0xe4000000].<BR> I/O at 0xd000=20
[0xd001].<BR> Non-prefetchable 32 bit =
memory at=20
0xe6000000 [0xe6000000].<BR></FONT></DIV></BODY></HTML>
------=_NextPart_000_0005_01C0A61B.A25214F0--