[tulip] Compaq 10_100 MiniPCI Ethernet NIC

Luiz Gustavo Cunha Barbato gustavo@liveware.com.br
Tue Dec 18 16:04:01 2001


Im using the 0.93 tulip driver and the 2.4.13 kernel.
When I do:
#!> insmod pci-scan.o <- OK

but when I do:
#!> insmod tulip.o

Everything stop, keyboard, mouse .... and I need to reboot my Linux Box.;

Why does it happen?


Atenciosamente,

Luiz Gustavo Cunha Barbato - Analista de Sistemas Trainee
LIVEWARE, Tecnologia a Serviço Ltda - Tel/Fax: +55 35 3471 3210
gustavo@liveware.com.br - www.liveware.com.br

----- Original Message -----
From: Jorge E. Aparicio M. <jorge_aparicio@sekureit.com>
To: Luiz Gustavo Cunha Barbato <gustavo@liveware.com.br>
Sent: Tuesday, December 18, 2001 4:22 PM
Subject: Re: [tulip] Compaq 10_100 MiniPCI Ethernet NIC


> Luiz,
>
> You should check the archive lists starting at July 2001.  A lot of
messages
> have been posted about the topic since then...
>
> You should also check
> http://user.cs.tu-berlin.de/~gregorrg/compaq/presario17xl470.html.  This
is
> a great link for Presario 1700XL users.  Section 9 (Network card) is a
> summary of what you have to do to set the driver up.
>
> By the way, this message is being sent from a RH 7.1 linuxbox, kernel
> 2.4.12, Compaq 10_100 MiniPCI Ethernet NIC, using Donald's drivers.
>
> Good luck,
>
> Jorge Aparicio.
>
> ----- Original Message -----
> From: "Luiz Gustavo Cunha Barbato" <gustavo@liveware.com.br>
> To: <tulip@scyld.com>
> Sent: Tuesday, December 18, 2001 4:25 AM
> Subject: [tulip] Compaq 10_100 MiniPCI Ethernet NIC
>
>
> > Hi, Can someone help me?
> >
> >
> >   I have a  notebook Compaq Presario 1700 17XL460, with Compaq 10_100
> > MiniPCI Ethernet NIC ethernet interface , and Im trying to install the
> tulip
> > driver(Ive downlowded this driver
> > http://prdownloads.sourceforge.net/tulip/tulip-0.9.14.tar.gz), and I am
> > using Conectiva Linux 7(or RedHat 7.2) with kernel 2.4.13.
> >
> > But I dont down how to install this driver.
> >
> > I try to do 'insmod tulip' but a error message appear saying (Hint:
insmod
> > erros can be caused by incorrect modules parameters, including invalid
IO
> or
> > IRQ parameters), but the tulip-diag detects my interface( Found a
Conexant
> > LANfinity adapter at 0x1400).
> >
> > Can someone help me?
> >
> >
> >
> > _______________________________________________
> > tulip mailing list, tulip@scyld.com
> > To change to digest mode or unsubscribe visit
> > http://www.scyld.com/mailman/listinfo/tulip