[tulip] NC100 NIC card, tulip driver won't compile.

Phil Barone pbarone@cfl.rr.com
Wed, 22 Nov 2000 14:08:05 -0500


Hi All,
  Hopefully someone can give me some help here. My fun little project here
is turning into a nightmare. I have a Linksys Network Everywhere NC100 card
that supposedly uses the tulip driver.

  I am going crazy trying to compile tulip.c. I have tried many suggestions
but keep getting basically the same errors. I think I just need to include
some library or somthing but don't know how or where. Here are my errors:

[root@localhost inet]#
gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototype
s -O6 -c tulip.c `[ -f /usr/include/linux/modversions.h ] &&
echo -DMODVERSIONS`
tulip.c: In function `tulip_open':
tulip.c:1437: structure has no member named `tbusy'
tulip.c:1438: structure has no member named `start'
tulip.c: In function `tulip_start_xmit':
tulip.c:2530: structure has no member named `tbusy'
tulip.c:2563: structure has no member named `tbusy'
tulip.c: In function `tulip_interrupt':
tulip.c:2582: structure has no member named `interrupt'
tulip.c:2586: structure has no member named `interrupt'
tulip.c:2667: structure has no member named `tbusy'
tulip.c:2671: structure has no member named `tbusy'
tulip.c:2672: `NET_BH' undeclared (first use in this function)
tulip.c:2672: (Each undeclared identifier is reported only once
tulip.c:2672: for each function it appears in.)
tulip.c:2757: structure has no member named `interrupt'
tulip.c: In function `tulip_close':
tulip.c:2903: structure has no member named `start'
tulip.c:2904: structure has no member named `tbusy'
tulip.c: In function `tulip_get_stats':
tulip.c:2943: structure has no member named `start'
tulip.c: In function `set_rx_mode':
tulip.c:3182: structure has no member named `tbusy'
[root@localhost inet]#

Can you please help?

Phil Barone (e-mail: pbarone@cfl.rr.com)
ICQ 34117606