[tulip] device or resource busy

[Charles Owen]

The card seemed to be firmly in place, but I took out the winmodem, and
put the card in that slot.

Everything works now.

Thanks very much for the help.

Charles.

On Fri, 17 Nov 2000, Donald Becker wrote:
> On Fri, 17 Nov 2000, Charles Owen wrote:
> 
> > Here is the output from "lspci" and "cat /proc/pci". I actually do not know
> > which one is the linksys card, so I have included the entire listing. (Is it
> > even listed? Perhaps this is my problem.)
> 
> That's your problem.
> 
> There is no PCI Ethernet device listed.
> 
> Check that the card is fully inserted into the PCI slot.
>   (If it's an ISA card, then it's not fully inserted into the PCI slot ;->)
> 
> > 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
> > 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
> > 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
> > 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
> > 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
> > 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
> > 00:0e.0 Multimedia video controller: Zoran Corporation ZR36120 (rev 03)
> > 00:0f.0 Multimedia audio controller: Aureal Semiconductor Vortex 1 (rev 02)
> > 00:10.0 Communication controller: US Robotics/3Com WinModem
> > 01:00.0 VGA compatible controller: nVidia Corporation Riva TnT 128 [NV04] (rev 04)   
> 
> Donald Becker				becker@scyld.com
> Scyld Computing Corporation		http://www.scyld.com
> 410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
> Annapolis MD 21403			410-990-9993
> 
> 
> _______________________________________________
> tulip mailing list
> tulip@scyld.com
> http://www.scyld.com/mailman/listinfo/tulip