[tulip] problem with LNE 100Tx v4.1

[Hank Barta]

On Wed, 15 Nov 2000, Dan Hollis wrote:

> tulip-diag doesn't know how to read the admtek media registers.
> Patch for tulip-diag attached.

    Thanks, here's the results from a patched tulip-diag:

tulip-diag.c:v2.04 9/26/2000 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a ADMtek AL985 Centaur-P adapter at 0xe000.
 Port selection is 100mbps full duplex (Link is on)
 Transmit started, Receive started, half-duplex.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit threshold is 128.
 The Comet MAC registers are c445c445 ffffc445 filter 8000000000000000.
WARNING: The EEPROM is missing or erased!
 Use '-a' or '-aa' to show device registers,
     '-e' to show EEPROM contents, -ee for parsed contents,
  or '-m' or '-mm' to show MII management registers.

--
Hank Barta                            White Oak Software Inc.
hbarta@enteract.com                   Predictable Systems by Design.(tm)
		Beautiful Sunny Winfield, Illinois