[tulip] Re: Accton EN2242

[Philippe Depouilly]

Hello,

I progress in discovering the Accton 2242 Informations:

when i do a tulip_diag -ee (list the eeprom), i find the MAC Address :

[root@xe3 lan]# ./tulip-diag -ee
tulip-diag.c:v2.04 9/26/2000 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a EN2242 de Phil adapter at 0x1c00.
 Port selection is 100mbps-SYM/PCS 100baseTx scrambler, half-duplex.
 Transmit stopped, Receive stopped, half-duplex.
  The Rx process state is 'Stopped'.
  The Tx process state is 'Stopped'.
  The transmit threshold is 128.
EEPROM size is 8.
 A simplifed EEPROM data table was found.
 The EEPROM does not contain transceiver control information.
EEPROM contents:
  0985 0002 0000 0000 d000 2359 657d 0000 <------- my mac address is
00:d0:59:23:7d:65
  0000 0400 0000 0000 0000 0000 0000 0100
  1216 1113 2242 1113 ffff 0000 0000 f0dc <--------  Vendor id=1113
Device id=1216
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 e156
 ID block CRC 0x30 (vs. 00).
  Full contents CRC 0xe156 (read as 0xe156).

Does it look like a classical network card ?

Thank-you,

Philippe.