PCMCIA Driver for SMC 10/100 CardBus

Fri May 5 10:34:18 2000

This is a multi-part message in MIME format.
--------------3DBE27938C388284AEC26F55
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I installed the netdriver 2.0 RPM, the latest config.opts, and followed the
instructions on the page.  I rebooted without the card inserted (see
dmesg.txt) then inserted the card (messages.txt).  It doesn't look like
cardmgr is using modprobe the way I expected it (from Don's previous
instructions).  Instead, it uses insmod and then complains because a couple
other modules aren't present.  I think I'm close, but feeling remarkably
stupid at the same time.  Arrgh!

--------------3DBE27938C388284AEC26F55
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.txt"

Linux version 2.2.14-5.0 (root@rocky) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #7 Thu May 4 14:50:04 EDT 2000
Detected 647204371 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 645.53 BogoMIPS
Memory: 257832k/262080k available (888k kernel code, 416k reserved, 2884k data, 60k init, 0k bigmem)
Dentry hash table entries: 262144 (order 9, 2048k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium III (Coppermine) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfd9ae
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1050-0x1057, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DARA-218000, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DARA-218000, 17301MB w/418kB Cache, CHS=2343/240/63
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :  1495.806 MB/sec
   p5_mmx    :  1589.532 MB/sec
   8regs     :  1113.282 MB/sec
   32regs    :   622.935 MB/sec
using fastest function: p5_mmx (1589.532 MB/sec)
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 hda3 < hda5 hda6 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 264560k swap-space (priority -1)
maestro: version 0.14 time 14:53:23 May  4 2000
PCI: Enabling bus mastering for device 00:40
maestro: Configuring ESS Maestro 2E found at IO 0x1400 IRQ 5
maestro:  subvendor id: 0x009f1028
maestro: PCI power managment capability: 0x7622
maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf
maestro: 1 channels configured.
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
Linux PCMCIA Card Services 3.1.8
  kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000
  options:  [pci] [cardbus] [apm]
Intel PCIC probe: 
  TI 1225 PCI-to-CardBus at bus 0 slot 4, mem 0x68000000, 2 sockets
    host opts [0]: [ring] [pwr save] [serial pci & irq] [no pci irq] [lat 168/32] [bus 32/34]
    host opts [1]: [ring] [pwr save] [serial pci & irq] [no pci irq] [lat 168/32] [bus 35/37]
    ISA irqs (scanned) = 3,4,7,9,10 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x1087
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Lucent Modem driver version 4.27.5.66 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS14 at 0x1800 (irq = 5) is a Lucent
cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019
ROM image dump:
  image 0: 0x000000-0x0001ff, signature PCIR
registered device ppp0

--------------3DBE27938C388284AEC26F55
Content-Type: text/plain; charset=us-ascii;
 name="messages.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="messages.txt"

May  5 10:20:58 rocky cardmgr[435]: initializing socket 0
May  5 10:20:58 rocky cardmgr[435]: socket 0: SMC EZ CardBus 10/100 Ethernet
May  5 10:20:58 rocky kernel: cs: cb_alloc(bus 32): vendor 0x1011, device 0x0019 
May  5 10:20:58 rocky cardmgr[435]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/cb_enabler.o'
May  5 10:20:58 rocky cardmgr[435]: module /lib/modules/2.2.14-5.0/pcmcia/pci-netif.o not available
May  5 10:20:58 rocky cardmgr[435]: module /lib/modules/2.2.14-5.0/pcmcia/cb_shim.o not available
May  5 10:20:58 rocky cardmgr[435]: module /lib/modules/2.2.14-5.0/pcmcia/tulip.o not available
May  5 10:20:59 rocky cardmgr[435]: get dev info on socket 0 failed: Resource temporarily unavailable

--------------3DBE27938C388284AEC26F55--

-------------------------------------------------------------------
To unsubscribe send a message body containing "unsubscribe"
to linux-tulip-request@beowulf.org