[tulip] Tulip driver; IRQ not assigned

[Michael Smith]

 Try allocating IRQ11 in your BIOS to that cards(the LNE100TX) PCI slot.
That should resolve this problem.

-----Original Message-----
From: Gary Dolan
To: tulip@scyld.com
Sent: 8/26/00 10:23 PM
Subject: [tulip] Tulip driver; IRQ not assigned

	Gentlemen
		I'm trying to use a Linksys LNE100TX card in a linux
box.
The diagnostic program for the tulip driver says that an interrupt has 
not been assigned, and that the PCI BIOS needs to be changed.  I 
have disabled the PnP OS feature, but still no help. The BIOS is 
AmiBIOS and on W98 the card is assigned IRQ 11, and works fine. 
What other setting can/ must be changed?

_______________________________________________
tulip mailing list
tulip@scyld.com
http://www.scyld.com/mailman/listinfo/tulip