Samsung SC1200-TX problem.

Heling Yi hlyi@yahoo.com
Sun May 2 21:33:47 1999


Thank a lot! The problem is fixed by removing the hub between samsung
card and 10BaseT net.

Heling

--- jferg <jferg@2boot.com> wrote:
> Heling Yi wrote:
> 
> > Hi folks,
> >
> > I have a samsung SC1200-TX rev-1a(with genuine DEC Tulip 21140 on
> > board)  ethernet card in a dual celeron computer. My net is
> 10BaseT.
> > The problem is that Samsung ethernet card transmits packets very
> > slowly, i.e. 90Kbyte-100Kbyte/sec under Linux(RH 5.2. I tried
> Kernel
> > 2.2.5, 2.2.3, 2.2.2, all have the same problem), but receiving
> packets
> > seems okay(between 700kbyte-1Mbyte/sec). I tried the lastest tulip
> > driver(0.91), it doesn't help either. However, the ethernet card
> works
> > flawlessly under windoze( both upload and download at
> > 800kbyte-1Mbyte/sec).
> >
> > diagnostics result is attached.
> >
> > Any idea? Thank in advance!
> >
> > Heling
> 
> I suspect you are connected via a switch.  Chack the half/full duplex
> status of the switch,  Likely ACKs are getting lost and there are
> lots of
> timeouts and retransmits.
> 
> ->>snip<--
> 
> 
> --
> Joe Ferguson, ApeX Systems Integration Corp.
> Voice:  919.468.8150
> FAX:    919.468.5288
> email:  jferg@2boot.com
> 
> 
> 
<HR>
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
Heling Yi wrote:
Hi folks,

I have a samsung SC1200-TX rev-1a(with genuine DEC Tulip 21140 on
board)  ethernet card in a dual celeron computer. My net is 10BaseT.
The problem is that Samsung ethernet card transmits packets very
slowly, i.e. 90Kbyte-100Kbyte/sec under Linux(RH 5.2. I tried Kernel
2.2.5, 2.2.3, 2.2.2, all have the same problem), but receiving packets
seems okay(between 700kbyte-1Mbyte/sec). I tried the lastest tulip
driver(0.91), it doesn't help either. However, the ethernet card works
flawlessly under windoze( both upload and download at
800kbyte-1Mbyte/sec).

diagnostics result is attached.

Any idea? Thank in advance!

Heling


I suspect you are connected via a switch.  Chack the half/full duplex status of the switch,  Likely ACKs are getting lost and there are lots of timeouts and retransmits.

->>snip<--
 

-- 
Joe Ferguson, ApeX Systems Integration Corp.
Voice:  919.468.8150
FAX:    919.468.5288
email:  jferg@2boot.com
  _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com