Weird tulip-diag results

[David Schwartz]

	tulip-diag says:

tulip-diag.c:v1.07 2/10/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Index #1: Found a Macronix 98713 PMAC adapter at 0x6100.
 Port selection is 10mpbs-serial 100baseTx scrambler, half-duplex.
 Transmit started, Receive started, half-duplex.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit unit is set to store-and-forward.

	dmesg says:

tulip.c:v0.90 10/20/98 becker@cesdis.gsfc.nasa.gov
eth0: Macronix 98713 PMAC at 0x6100, 00 40 33 a5 0f 9e, IRQ 11.
eth0:  EEPROM default media type 100baseTx.
eth0:  Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
eth0:  Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0)
block.
eth0:  Index #2 - Media 10baseT-FD (#4) described by a 21140 non-MII (0)
block.
eth0:  Index #3 - Media 100baseTx-FD (#5) described by a 21140 non-MII (0)
block

	It should be running (and is) 100baseTx, half duplex. So what is a
"10mpbs-serial"?

	DS