v0.91 driver released for testing

David Godfrey dave@delta.demon.co.uk
Sat Apr 17 11:08:56 1999 

* Donald Becker (becker@cesdis1.gsfc.nasa.gov) [990417 03:53]:
> 
> I'm assuming that this driver fixes all reported problems, so please
> re-report any problems that remain.
> 

I've got three 'Atrend ATC-2113T' cards that have problems with this
(and previous) versions of the driver. The cards are 21143-PC based, I
believe, and work fine with the v0.90p driver. They are connected to a
Netgear FS104 10/100 switch.

Here are the message logs and tulip-diagnostics for one of the cards.

I am afraid I do not understand what any of this stuff means but am
willing to play if there is anything you want me to try.

Regards

Dave

Apr 17 11:35:00 wang linux: tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov
Apr 17 11:35:00 wang linux: eth0: Digital DS21143 Tulip rev 48 at 0x9300, 00:E0:FD:00:07:9D, IRQ 9.
Apr 17 11:35:00 wang linux: eth0:  EEPROM default media type Autosense.
Apr 17 11:35:00 wang linux: eth0:  Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
Apr 17 11:35:00 wang linux: eth0:  Index #1 - Media MII 100baseT4 (#15) described by a 21142 Serial PHY (2) block.
Apr 17 11:35:00 wang linux: eth0:  Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
Apr 17 11:35:00 wang linux: eth0:  Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4) block.
Apr 17 11:35:00 wang linux: rtl8139.c:v1.04 9/22/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
Apr 17 11:35:00 wang linux: eth1: RealTek RTL8139 Fast Ethernet at 0x9100, IRQ 15, 00:00:21:69:3c:6d.
Apr 17 11:35:00 wang linux: smc-ultra.c:v2.02 2/3/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Apr 17 11:35:00 wang linux: eth2: SMC Ultra at 0x300, 00 00 C0 D0 6D AD, IRQ 10 memory 0xcc000-0xcffff.
Apr 17 11:35:00 wang linux: Partition check:
Apr 17 11:35:01 wang linux:  sda: sda1 sda2 sda4
Apr 17 11:35:01 wang linux:  hda: hda1 hda2 hda3 hda4
Apr 17 11:35:01 wang linux: VFS: Mounted root (ext2 filesystem) readonly.
Apr 17 11:35:01 wang linux: Freeing unused kernel memory: 36k freed
Apr 17 11:35:01 wang linux: Adding Swap: 66556k swap-space (priority -1)
Apr 17 11:35:01 wang linux: Adding Swap: 66020k swap-space (priority -2)
Apr 17 11:35:12 wang linux: eth0: 21140 transmit timed out, status f0260000, SIA 41e1d2ce ffff0001 fffbffff 8ff0c008, resetting...
Apr 17 11:35:12 wang linux: eth0: transmit timed out, switching to MII 100baseT4 media.

tulip-diag.c:v1.10 4/12/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Index #1: Found a Digital DS21143 Tulip adapter at 0x9300.
 Port selection is 100mbps-SYM/PCS 100baseTx scrambler, full-duplex.
 Transmit stopped, Receive stopped, full-duplex.
  The Rx process state is 'Stopped'.
  The Tx process state is 'Stopped'.
  The transmit threshold is 128.
 Use '-a' to show device registers,
     '-e' to show EEPROM contents,
  or '-m' to show MII management registers.
tulip-diag.c:v1.10 4/12/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Index #1: Found a Digital DS21143 Tulip adapter at 0x9300.
Digital DS21143 Tulip chip registers at 0x9300:
  ffa08000 ffffffff ffffffff 00006810 00006a10 f0000102 b3860200 f3fe0000
  e0000000 ffffcbf8 ffffffff fffe0000 000000c4 ffff0000 fffa0000 8ff1c008
 Port selection is 100mbps-SYM/PCS 100baseTx scrambler, full-duplex.
 Transmit stopped, Receive stopped, full-duplex.
  The Rx process state is 'Stopped'.
  The Tx process state is 'Stopped'.
  The transmit threshold is 128.
tulip-diag.c:v1.10 4/12/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Index #1: Found a Digital DS21143 Tulip adapter at 0x9300.
 Port selection is 100mbps-SYM/PCS 100baseTx scrambler, full-duplex.
 Transmit stopped, Receive stopped, full-duplex.
  The Rx process state is 'Stopped'.
  The Tx process state is 'Stopped'.
  The transmit threshold is 128.
Ethernet MAC Station Address 00:E0:FD:00:07:9D.
EEPROM transceiver/media description for the Digital DS21143 Tulip chip.
Leaf node at offset 30, default media type 0800 (Autosense).
 4 transceiver description blocks:
  Media 10baseT, block type 2, length 6.
   Serial transceiver for 10baseT (media type 0).
    GP pin direction 08af  GP pin data 00a5.
  Media MII 100baseT4, block type 2, length 6.
   Serial transceiver for MII 100baseT4 (media type 255).
    CSR13 08ff  CSR14 00a5  CSR15 0488.
    GP pin direction af03  GP pin data a508.
  Media 100baseTx, block type 4, length 8.
   SYM transceiver for 100baseTx (media type 3).
    GP pin direction 08af  GP pin data 00a5.
    No media detection indication (command 80 61).
  Media 100baseTx Full Duplex, block type 4, length 8.
   SYM transceiver for 100baseTx Full Duplex (media type 5).
    GP pin direction 08af  GP pin data ffa5.
    No media detection indication (command 80 ff).
tulip-diag.c:v1.10 4/12/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Index #1: Found a Digital DS21143 Tulip adapter at 0x9300.
 Port selection is 100mbps-SYM/PCS 100baseTx scrambler, full-duplex.
 Transmit stopped, Receive stopped, full-duplex.
  The Rx process state is 'Stopped'.
  The Tx process state is 'Stopped'.
  The transmit threshold is 128.
   No MII transceivers found!
  Internal autonegotiation state is 'Autonegotiation disabled'.


-- 
Dave Godfrey
dave@delta.demon.co.uk
Fax +44 181 286 1909
PGP key available