Problems with D-Link DFE-660tx PCMCIA Ethernet card

Kai Hoefler kai@ica1.uni-stuttgart.de
Mon Jan 31 11:16:51 2000


I have the following problem with a D-Link DFE-660tx PCMCIA Ethernet
card.

When I started to use the card it worked and the card was recognized as

Nov 24 15:25:51 kh kernel: tulip.c:v0.91 4/14/99
becker@cesdis.gsfc.nasa.gov 
 (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug
Ledford) 
Nov 24 15:25:51 kh kernel: eth0: Digital DS21143 Tulip rev 65 at 0x400, 
 00:80:C8:8F:61:0C, IRQ 9. 
Nov 24 15:25:51 kh kernel: eth0:  EEPROM default media type Autosense. 
Nov 24 15:25:51 kh kernel: eth0:  Index #0 - Media MII (#11) described
by 
 a 21142 MII PHY (3) block. 
Nov 24 15:25:51 kh kernel: eth0:  MII transceiver #0 config 3000 status
7809 
 advertising 01e1. 

The card worked and I was happy.

But later the problems started and the card was sometimes not recognized 
correctly. I upgraded from pcmcia 3.0.14 to various versions of 3.1 but
the card worked only sometimes.
Now the card is always recognized as 

tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov 
 (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug
Ledford)
eth0: Digital DS21143 Tulip rev 73 at 0x400, 00:80:00:80:00:80, IRQ 9.
eth0:  EEPROM default media type 10baseT.
eth0:  MII transceiver #0 config 3000 status 7809 advertising 01e1.

The chip revision seems to have changed and the MAC address is wrong.
Does anybody know what is going on?

I see in tulip_cb.c that revision 65 is handeled differently. Is it
possible 
to skip the call determining the revision and set it to 65? Or could
this
be of harm for the card.

Is it possible that the driver may harm the network card? 

Thanks for your help


         Kai


-- 
Kai Hoefler                  e-mail:          kai@ica1.uni-stuttgart.de
Uni Stuttgart, ICA 1         office: 0711-685-3626        fax: 685-3658 
Pfaffenwaldring 27           http://www.ica1.uni-stuttgart.de/~kai
70569 Stuttgart, Germany
-------------------------------------------------------------------
To unsubscribe send a message body containing "unsubscribe"
to linux-tulip-bug-request@beowulf.org