[tulip-bug] LNE100Tx problem not on SMP
Thu, 21 Dec 2000 11:49:19 -0500 (EST)
On Thu, 21 Dec 2000, Benjamin Hille wrote:
> Subject: [tulip-bug] LNE100Tx problem not on SMP
> To confirm the problem stated by Mark Staggs.
> I have a single AMD Duron system with RH 7
> I have try both normal and test driver and they both have the same
> behaviour. Activity on the link but no packet going through.
> tulip-diag.c:v2.04 9/26/2000 Donald Becker (firstname.lastname@example.org)
> Index #1: Found a ADMtek AL985 Centaur-P adapter at 0xe400.
> Interrupt sources are pending! CSR5 is fc06c012.
> Tx complete indication.
> Link passed indication.
> Early Rx indication.
> Flags: bus master, medium devsel, latency 32, IRQ 11
> I/O ports at e400
Interrupts are not getting through.
Normally I would say "Make certain that you don't have the APIC code
enabled", a Duron system shouldn't have an APIC. I don't know what would be
blocking the interrupt in your case.
> By the way is anything wrong with my EEPROM ?
What does the driver detection message say?
Donald Becker email@example.com
Scyld Computing Corporation http://www.scyld.com
410 Severn Ave. Suite 210 Second Generation Beowulf Clusters
Annapolis MD 21403 410-990-9993