ASIX AX88140AQ-Problem

Christian Kuehn (Hostmaster) christian@hamburg.gay-web.de
Sat Jan 16 19:45:30 1999


Hi !

Just after installing a new Fast-Ethernet-NIC, I have only trouble.

I try to use the tulip.c-driver as described by Donald.
Here are the results from mii-diag, log-files and /proc/pci :

Result after doing mii-diag

jeffrey:/home/tks # ./mii-diag -A 100baseTx-HD eth1
 Setting the media capability advertisement register of PHY #1 to
0x0081.
Basic registers of MII PHY #1:  1000 782d 0181 b800 0081 0000 0000 0000.
 Basic mode control register 0x1000: Auto-negotiation enabled.
 You have link beat, and everything is working OK.
 Your link partner is strange, status 0000.
jeffrey:/home/tks #


******************
Result after doing "insmod tulip debug=6"

Jan 17 01:30:13 jeffrey kernel: Found ASIX AX88140 at PCI I/O address
0xb000.
Jan 17 01:30:13 jeffrey kernel: tulip.c:v0.90f 12/17/98
becker@cesdis.gsfc.nasa.gov
Jan 17 01:30:13 jeffrey kernel: eth1: ASIX AX88140 at 0xb000, 00 80 ad
41 fe
4a, IRQ 11.
Jan 17 01:30:13 jeffrey kernel: eth1:  EEPROM default media type
Autosense.
Jan 17 01:30:13 jeffrey kernel: eth1:  MII interface PHY 0, setup/reset
sequences 0/0 long, capabilities e0 78.
Jan 17 01:30:13 jeffrey kernel: eth1:  Index #0 - Media MII (#11)
described
by a 21140 MII PHY (1) block.
Jan 17 01:30:13 jeffrey kernel: eth1:  MII transceiver #1 config 1000
status
782d advertising 0081.
Jan 17 01:30:13 jeffrey kernel: eth1:  Advertising 01e1 on PHY 1,
previously
advertising 0081.

********************
Result after doing "ifconfig eth1 192.168.100.1"

Jan 17 01:30:57 jeffrey kernel: eth1: tulip_open() irq 11.
Jan 17 01:30:57 jeffrey kernel: eth1:  Advertising 01e1 on PHY 0 (1).
Jan 17 01:30:57 jeffrey kernel: eth1: Using media type MII, CSR12 is 00.
Jan 17 01:30:57 jeffrey kernel: eth1: Done tulip_open(), CSR0 00200800,
CSR5 00
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt  csr5=0x00670004 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt  csr5=0x00660000 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: exiting interrupt, csr5=0x660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt  csr5=0x00670004 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt  csr5=0x00660000 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: exiting interrupt, csr5=0x660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt  csr5=0x00670004 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: interrupt  csr5=0x00660000 new
csr5=0x00660000.
Jan 17 01:30:57 jeffrey kernel: eth1: exiting interrupt, csr5=0x660000.
Jan 17 01:31:02 jeffrey kernel: eth1: Media selection tick, status
00660000
mode  000c2002 SIA 00000100 00000000 3fac3cfc 00000000.
Jan 17 01:31:02 jeffrey kernel: eth1: MII status 782d, Link partner
report
0000, CSR12 100, HD.


*****************
Now: route add -net 192.168.100.0 eth1
Result after doing "traceroute 192.168.100.2"
(This host is already established)

Jan 17 01:34:33 jeffrey kernel: eth1: interrupt  csr5=0x00678424 new
csr5=0x006
Jan 17 01:34:33 jeffrey kernel: eth1: Transmit error, Tx status
00008002.
Jan 17 01:34:33 jeffrey kernel: eth1: interrupt  csr5=0x00260000 new
csr5=0x002
Jan 17 01:34:33 jeffrey kernel: eth1: exiting interrupt, csr5=0x260000.
Jan 17 01:34:38 jeffrey kernel: eth1: interrupt  csr5=0x00270404 new
csr5=0x002
Jan 17 01:34:38 jeffrey kernel: eth1: interrupt  csr5=0x00260000 new
csr5=0x002
Jan 17 01:34:38 jeffrey kernel: eth1: exiting interrupt, csr5=0x260000.
Jan 17 01:34:43 jeffrey kernel: eth1: interrupt  csr5=0x00270404 new
csr5=0x002
Jan 17 01:34:43 jeffrey kernel: eth1: interrupt  csr5=0x00260000 new
csr5=0x002
Jan 17 01:34:43 jeffrey kernel: eth1: exiting interrupt, csr5=0x260000.
Jan 17 01:34:48 jeffrey kernel: eth1: interrupt  csr5=0x00270404 new
csr5=0x002
Jan 17 01:34:48 jeffrey kernel: eth1: interrupt  csr5=0x00260000 new
csr5=0x002
Jan 17 01:34:48 jeffrey kernel: eth1: exiting interrupt, csr5=0x260000.


*********************
Result from /proc/pci

jeffrey:/home/tks # cat /proc/pci |more
PCI devices found:
  Bus  0, device  12, function  0:
    Ethernet controller: ASIX 88140 (rev 3).
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master
Capable.  Lat
ncy=32.  Min Gnt=20.Max Lat=40.
      I/O at 0xb000.
      Non-prefetchable 32 bit memory at 0xe3800000.
  Bus  0, device  11, function  0:
    Ethernet controller: Winbond NE2000-PCI (rev 0).
      Medium devsel.  Fast back-to-back capable.  IRQ 12.
      I/O at 0xb400.



Any idea whats happened ???

Thanks in advance!
Christian

PS
With Win95 everything works!
-- 
Christian Kuehn, 20257 Hamburg
Tel. (040) 40 19 72 32 / Fax. (040) 40 19 72 30

eMail: christian@hamburg.gay-web.de
http://hamburg.gay-web.de/~tks

Und immer einen Besuch wert: http://hamburg.gay-web.de
******************************************************