[realtek] insmod problem
Nick Ellson
grimm at nickellson.com
Tue Oct 19 06:54:52 PDT 2004
Naresh,
I am having the same issue with Gentoo Linux on 2.6.x kernels. If you find
a response to your query, let me know. I have written a few boards, no
answers yet.
Nick
--
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist.
On Sun, 17 Oct 2004, Naresh Deshaveni wrote:
> Hi,
>
> I have been trying to get my RealTek 8139 card work in Redhat linux 8.0.
> but without success.
> My linux kernel version is 2.4.18-14
>
> I had 8139too.o in the /lib/modules/2.4.18-14/kernel/drivers/net/
> directory.
> When I did insmod 8139too I got the following message.
> -----------------------------------------------------------------------------------------------------------------------------------------
> /lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol
> mii_ethtool_gset_Raeb9c2b4
> /lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol
> mii_nway_restart_R9d437993
> /lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol
> mii_link_ok_R633bd7b9
> /lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol
> mii_ethtool_sset_Rc366593c
> ----------------------------------------------------------------------------------------------------------------------------------------
>
>
> The Dmesg gave me the following
> ----------------------------------------------------------------------------------------------------------------------------------------
> dmesg
> Linux version 2.4.18-14 (bhcompile at stripples.devel.redhat.com) (gcc version
> 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000007f00000 (usable)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 127MB LOWMEM available.
> On node 0 totalpages: 32512
> zone(0): 4096 pages.
> zone(1): 28416 pages.
> zone(2): 0 pages.
> Kernel command line: auto BOOT_IMAGE=linux ro root=303
> BOOT_FILE=/boot/vmlinuz-2.4.18-14
> Initializing CPU#0
> Detected 801.849 MHz processor.
> Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
> Console: colour VGA+ 80x25
> Calibrating delay loop... 1594.42 BogoMIPS
> Memory: 123816k/130048k available (1326k kernel code, 4832k reserved, 999k
> data, 212k init, 0k highmem)
> Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
> Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
> Mount cache hash table entries: 2048 (order: 2, 16384 bytes)
> ramfs: mounted with options: <defaults>
> ramfs: max_pages=15604 max_file_pages=0 max_inodes=0 max_dentries=15604
> Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
> CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
> CPU: Common caps: 0383f9ff 00000000 00000000 00000000
> CPU: Intel Pentium III (Coppermine) stepping 0a
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xfb280, last bus=1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 2: assuming transparent
> PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
> PCI: Found IRQ 5 for device 00:1f.3
> PCI: Sharing IRQ 5 with 00:1f.5
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
> Starting kswapd
> VFS: Diskquotas version dquot_6.5.0 initialized
> Detected PS/2 Mouse Port.
> pty: 2048 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
> SERIAL_PCI ISAPNP enabled
> ttyS0 at 0x03f8 (irq = 4) is a 16550A
> ttyS1 at 0x02f8 (irq = 3) is a 16550A
> Real Time Clock Driver v1.10e
> oprofile: mapping APIC.
> oprofile: enabled local APIC. Err code 00000000
> oprofile 0.2 loaded, major 254
> block: 240 slots per queue, batch=60
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev f9
> PIIX4: chipset revision 2
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
> hda: ST340823A, ATA DISK drive
> hdc: SAMSUNG CD-ROM SC-152C, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> blk: queue c03c0004, I/O limit 4095Mb (mask 0xffffffff)
> blk: queue c03c0004, I/O limit 4095Mb (mask 0xffffffff)
> hda: 78165360 sectors (40021 MB) w/512KiB Cache, CHS=4865/255/63, UDMA(66)
> ide-floppy driver 0.99.newide
> Partition check:
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13
> hda14 >
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> NET4: Frame Diverter 0.46
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> ide-floppy driver 0.99.newide
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 8192 bind 16384)
> Linux IP multicast router 0.06 plus PIM-SM
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> RAMDISK: Compressed image found at block 0
> Freeing initrd memory: 126k freed
> VFS: Mounted root (ext2 filesystem).
> Journalled Block Device driver loaded
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Freeing unused kernel memory: 212k freed
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 13:44:31 Sep 4 2002
> usb-uhci.c: High bandwidth mode enabled
> PCI: Found IRQ 9 for device 00:1f.2
> PCI: Setting latency timer of device 00:1f.2 to 64
> usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> usb.c: registered new driver hiddev
> usb.c: registered new driver hid
> hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
> hid-core.c: USB HID support drivers
> mice: PS/2 mouse device common for all mice
> EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal
> Adding Swap: 265032k swap-space (priority -1)
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,5), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,6), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,9), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> parport0: PC-style at 0x378 [PCSPP,TRISTATE]
> ohci1394: pci_module_init failed
> ip_tables: (C) 2000-2002 Netfilter core team
> 8139too Fast Ethernet driver 0.9.25
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 94M
> agpgart: Detected an Intel i810 E Chipset.
> agpgart: AGP aperture is 64M @ 0xe0000000
> memory : c441a2e0
> memory : 00000000
> memory : c441a320
> 8139too Fast Ethernet driver 0.9.25
> ---------------------------------------------------------------------------------------------------------------------------------------
>
>
>
>
> /sbin/lspci -v
> ---------------------------------------------------------------------------------------------------------------------------------------
> 00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory
> Controller Hub] (rev 03)
> Subsystem: Intel Corp. 82810E DC-133 GMCH [Graphics Memory
> Controller Hub]
> Flags: bus master, fast devsel, latency 0
>
> 00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset
> Graphics Controller] (rev 03) (prog-if 00 [VGA])
> Subsystem: Intel Corp. 82810E DC-133 CGC [Chipset Graphics
> Controller]
> Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 12
> Memory at e0000000 (32-bit, prefetchable) [size=64M]
> Memory at e6000000 (32-bit, non-prefetchable) [size=512K]
> Capabilities: [dc] Power Management version 1
>
> 00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00
> [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: e4000000-e5ffffff
>
> 00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
> Flags: bus master, medium devsel, latency 0
>
> 00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80
> [Master])
> Subsystem: Intel Corp. 82801AA IDE
> Flags: bus master, medium devsel, latency 0
> [virtual] I/O ports at 01f0
> [virtual] I/O ports at 03f4
> [virtual] I/O ports at 0170
> [virtual] I/O ports at 0374
> I/O ports at f000 [size=16]
>
> 00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI])
> Subsystem: Intel Corp. 82801AA USB
> Flags: bus master, medium devsel, latency 0, IRQ 9
> I/O ports at d000 [size=32]
>
> 00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
> Subsystem: Intel Corp. 82801AA SMBus
> Flags: medium devsel, IRQ 5
> I/O ports at 5000 [size=16]
>
> 00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev
> 02)
> Subsystem: Unknown device 4352:5934
> Flags: bus master, medium devsel, latency 0, IRQ 5
> I/O ports at d400 [size=256]
> I/O ports at d800 [size=64]
>
> 01:05.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
> Subsystem: Conexant Dynalink 56PMi
> Flags: bus master, medium devsel, latency 32, IRQ 5
> Memory at e5000000 (32-bit, non-prefetchable) [size=64K]
> I/O ports at c000 [size=8]
> Capabilities: [40] Power Management version 2
>
> 01:0a.0 Ethernet controller: MYSON Technology Inc SURECOM EP-320X-S 100/10M
> Ethernet PCI Adapter
> Subsystem: MYSON Technology Inc SURECOM EP-320X-S 100/10M Ethernet
> PCI Adapter
> Flags: bus master, medium devsel, latency 32, IRQ 11
> I/O ports at c400 [size=256]
> Memory at e5010000 (32-bit, non-prefetchable) [size=1K]
> Expansion ROM at <unassigned> [disabled] [size=64K]
> ---------------------------------------------------------------------------------------------------------------------------------------
>
>
> I have googled but could not find the solution.
> I have also downloaded the source code and compiled but still gettiing the
> same message.
> I am not able to get the eth interface Up.
> Even when I tried to load the pci scan moudle I get the similar message as
> '.....unresolved symbol... '.
>
> PLease help me in getting the card detected.
> Thank you
>
> Regards,
> Naresh
>
> _________________________________________________________________
> Movies, music, celeb news. Stay in the loop. http://www.msn.co.in/cinema/
> With MSN Entertainment!
>
> _______________________________________________
> realtek mailing list
> realtek at scyld.com
> http://www.scyld.com/mailman/listinfo/realtek
>
More information about the realtek
mailing list