R: [realtek] (no subject)

Angelo Dipierro angelo.dipierro@tiscalinet.it
Thu, 1 Feb 2001 23:01:40 +0100


These are the various messages I get...

kernel: Linux PCMCIA Card Services 3.1.19
kernel:   kernel build: 2.2.16-22 #1 Tue Aug 22 16:49:06 EDT 2000
kernel:   options:  [pci] [cardbus] [apm]
kernel: PCI routing table version 1.0 at 0xf6030
kernel: Intel PCIC probe:
kernel:   TI 1225 rev 01 PCI-to-CardBus at slot 00:03, mem 0x68000000
kernel:     host opts [0]: [pci + serial irq] [pci irq 5] [lat 168/176] [bus
32/34]
kernel:     host opts [1]: [pci + serial irq] [pci irq 5] [lat 168/176] [bus
35/37]
kernel:     ISA irqs (scanned) = 3,4,7,11,15 PCI status changes
cardmgr[2727]: starting, version is 3.1.19
cardmgr[2727]: watching 2 sockets
kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
kernel: cs: IO port probe 0x0800-0x08ff: clean.
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x400-0x44f
0x4d0-0x4d7
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
kernel: cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8139
cardmgr[2727]: initializing socket 0
cardmgr[2727]: socket 0: NetSurf Cardbus 10/100 Ethernet Adapter
cardmgr[2727]: executing: 'modprobe realtek_cb'
kernel: rtl8139.c:v1.12 9/14/2000 Donald Becker, becke
kernel:  http://www.scyld.com/network/rtl8139.html
cardmgr[2727]: get dev info on socket 0 failed: Resource temporarily
unavailable

this is /proc/interrupts...

           CPU0
  0:      59580          XT-PIC  timer
  1:       2374          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:          2          XT-PIC  Intel 440MX, i82365
  8:          1          XT-PIC  rtc
  9:       1841          XT-PIC  usb-uhci, i82365
 13:          1          XT-PIC  fpu
 14:      95001          XT-PIC  ide0
NMI:          0

and this the output for lspci -vv -d10ec:8139

20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev
10)
 Subsystem: Realtek Semiconductor Co., Ltd. RT8139
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
   Stepping- SERR- FastB2B-
 Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
  <TAbort- <MAbort- >SERR- <PERR-
 Interrupt: pin A routed to IRQ 0
 Region 0: I/O ports at <unassigned> [disabled]
 Region 1: Memory at <ignored> (32-bit, non-prefetchable)
 Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

hope this helps :-)
bye

angelo.dipierro@tiscalinet.it
Life sucks ! [Marvin the android]