[realtek] Rtl8139 & 2.4.0-test10

[Georg Ritter]

Hi, 

thanks for the hint! I was confused with the menu option "Pocket Adapters"
in the kernel config. I did not have the idea, that it could work with the
'normal' drivers.

So I compiled in the rtl8139too and have attached the messages I receive
when inserting the card, because smthg. fails
 

Greetings, 

	Georg Ritter

in /var/log/messages (RH7.0)
 POSIX conformance testing by UNIFIX
 PCI: PCI BIOS revision 2.10 entry at 0xfd83e, last bus=1
 PCI: Using configuration type 1
 PCI: Probing PCI hardware
 Unknown bridge resource 0: assuming transparent
 Unknown bridge resource 2: assuming transparent
 PCI: Using IRQ router VIA [1106/0596] at 00:07.0
 PCI: Found IRQ 5 for device 00:07.5
 PCI: The same IRQ used for device 01:00.0
 Linux NET4.0 for Linux 2.4
 Based upon Swansea University Computer Society NET3.039
...
 [drm] Initialized tdfx 1.0.0 20000928 on minor 63
 Linux PCMCIA Card Services 3.1.22
   options:  [pci] [cardbus] [pm]
 NET4: Linux TCP/IP 1.0 for NET4.0
 IP Protocols: ICMP, UDP, TCP
 IP: routing cache hash table of 512 buckets, 4Kbytes
 TCP: Hash tables configured (established 4096 bind 4096)
 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 kmem_create: Forcing size word alignment - nfs_fh
 Yenta IRQ list 0808, PCI irq10
 Socket status: 30000827
 Yenta IRQ list 0808, PCI irq10
 Socket status: 30000827
...
 cs: cb_alloc(bus 2): vendor 0x10ec, device 0x8138
 PCI: Failed to allocate resource 0 for PCI device 10ec:8138
 PCI: Enabling device 02:00.0 (0000 -> 0003)
 8139too Fast Ethernet driver 0.9.11 loaded
 8139too: Invalid PCI region size(s), aborting


and the output of /proc/pci with the inserted card:
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4] (rev 3).
      Prefetchable 32 bit memory at 0xfd000000 [0xfdffffff].
  Bus  0, device   1, function  0:
    PCI bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4 AGP] (rev 0).
      Master Capable.  No bursts.  Min Gnt=12.
  Bus  0, device   7, function  0:
    ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev
25).
  Bus  0, device   7, function  1:
    IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
      Master Capable.  Latency=64.
      I/O at 0x1000 [0x100f].
  Bus  0, device   7, function  2:
    USB Controller: VIA Technologies, Inc. UHCI USB (rev 10).
      Master Capable.  Latency=64.
      I/O at 0x1020 [0x103f].
  Bus  0, device   7, function  4:
    ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
32).
  Bus  0, device   7, function  5:
    Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controller (rev 33).
      IRQ 5.
      I/O at 0x1400 [0x14ff].
      I/O at 0x1014 [0x1017].
      I/O at 0x1010 [0x1013].
  Bus  0, device  10, function  0:
    CardBus bridge: O2 Micro, Inc. 6832 (rev 52).
      IRQ 10.
      Master Capable.  Latency=168.  Max Lat=5.
      Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
  Bus  0, device  10, function  1:
    CardBus bridge: O2 Micro, Inc. 6832 (#2) (rev 52).
      IRQ 10.
      Master Capable.  Latency=168.  Max Lat=5.
      Non-prefetchable 32 bit memory at 0x10001000 [0x10001fff].
  Bus  1, device   0, function  0:
    VGA compatible controller: Trident Microsystems CyberBlade/i7d (rev
92).
      IRQ 5.
      Master Capable.  Latency=64.
      Non-prefetchable 32 bit memory at 0xfc000000 [0xfc7fffff].
      Non-prefetchable 32 bit memory at 0xfb800000 [0xfb81ffff].
      Non-prefetchable 32 bit memory at 0xfb000000 [0xfb7fffff].
  Bus  2, device   0, function  0:
    Ethernet controller: PCI device 10ec:8138 (rev 16).
      IRQ 10.
      Master Capable.  No bursts.  Min Gnt=32.Max Lat=64.
      I/O at 0x1000 [0xfff].
      Non-prefetchable 32 bit memory at 0x10800000 [0x108001ff].