problem

[John L Thompson]

Thanks much for your help.  I have reviewed the PCI table and the
interrupts.   The PCI table states that I have video and the non-working
network card on IRQ 11.  There shouldn't be a problem for PCI to share
interrupts.  Also, when I check the interrupts, IRQ 11 does not show up.
What does that mean?  BTW, I have two network cards in this system.  An SMC
card, based on the Realtek 8029, which works and the Realtek 8139 card which
does not.

Thanks again.

-----Original Message-----
From: Mike Chinander [mailto:mchinand@midway.uchicago.edu]
Sent: Tuesday, October 12, 1999 4:23 PM
To: John L Thompson
Cc: linux-realtek@beowulf.gsfc.nasa.gov
Subject: Re: problem


The previous suggestions are good.  Since you are new to linux, I'll
suggest you do

cat /proc/pci
cat /proc/interrupts

which will tell you if you indeed have a realtek card and if there are any
shared interrupt problems with other devices.

--Mike


On Tue, 12 Oct 1999, John L Thompson wrote:

> When I issue my "insmod rlt8139.o" command I get an error - "init_module:
> Device or resource busy"
>
> I am logged in as root.  I am fairly new to Linux and I am stumped.
>
> TIA for your help.
>
> --John
>

--
Michael Chinander                                  University of Chicago
m-chinander@uchicago.edu    (773)702-1446 (Voice)    (773)702-0371 (Fax)

 | To unsubscribe, send mail to Majordomo@cesdis.gsfc.nasa.gov, and within the
 |  body of the mail, include only the text:
 |   unsubscribe this-list-name youraddress@wherever.org
 | You will be unsubscribed as speedily as possible.