[eepro100] Problems with the driver

[Dan Hole]

I have installed mandrake 10.2 on a hp e-pc 40 this has got an on board
network card, and mandrake detects it as eepro100, the card seems to
transmit but will not receive
 
Has anyone had similer problems???
 
i cannot copy the whole logs from the machine as i cannot connect the the
net, so i'm using a diffrent computer, here anre some bits i have noticed
though.
 
dmesg says
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out: status f048 0c00 at 0/60 command 0001a000
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out: status f048 0c00 at 60/120 command 0001a000
 
ifconfig says
eth0    link encap:Ethernet HWaddr 00:04:23:28:2D:69
           inet addr:192.168.200.10 Bcast192.168.200.255 Mask255.255.255.0
          inet6 addr: fe80::204:23ff:fe28:2d69/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
all the rest is zero's apart from the apart TX packets, and TX byte
 
IF you need anyoe information plaese e-mail
 
dan at eloh.cu.ul
 
Daniel Hole
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.scyld.com/pipermail/eepro100/attachments/20050801/60af305d/attachment.html