[eepro100] sleep mode persistence

[Donald Becker]

On Wed, 2 Oct 2002, Frank Lenaerts wrote:

> on Mon, Sep 30, 2002 at 05:13:29PM -0400, Donald Becker wrote about Re: [eepro100] sleep mode persistence:
> 
> > In this case I suspect a problem a problem with card activation that may
> > be solved by using my driver set and driver interface.
> 
> Using your driver (i.e.eepro100.c, pci-scan.{c,h}, kern_compat.h), I
> get the following output:

What was the detection message?

> # dmesg
> Command ff was not immediately accepted, 10001 ticks!
...
> Command ff was not immediately accepted, 10001 ticks!
> eth1: The EEPro100 chip is missing!
> eth1: The EEPro100 chip is missing!
> eth1: The EEPro100 chip is missing!

Yup, the chip is no longer responding to any register access.  If it was
initially detected correctly, try running 'lspci' after failure.

-- 
Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993