[eepro100] card reports no resources

[John Ketchum]

100 500 200 256 500 3000 60 0 0

I added the line
vm/bdflush = 100 500 200
to /etc/sysctl.conf, did sysctl -p, and got the above result.

At 01:28 AM 8/3/2002 +0800, Wei Keong wrote:
>So, after applying the changes, what does the /proc/sys/vm/bdflush look
>like? My kernel 2.4.18 has the value below, can i do the same using
>sysctl?
>
>40      0       0       0       500     3000    60      0       0
>
>
>Thanks,
>Wei Keong
>
>
>
>On Fri, 2 Aug 2002, John Ketchum wrote:
>
> > Thanks-- that seems to do the trick  The problem persisted for 5 or 10
> > minutes after I changed the settings in /proc/sys/vm/bdflush, but has not
> > recurred since, so I am hopeful that this takes care of it.  I have no clue
> > why-- if anyone can provide an explanation, or, better yet, can point to a
> > good reference on kernel tuning,  I would be very grateful.
> >
> > John
> >
> > John Ketchum wrote:
> >  > After perusing this mail list, and seeing several threads reporting
> >  > similar problems, I tried the fix recommended by Donal Becker in one
> >  > thread:
> >  > echo "100 500 200">/proc/sys/vm/bdflush
> >  > then rebooted. I guess I don't understand the workings of the /proc
> >  > file system, because the changes that resulted in /proc/sys/vm/bdflush
> > Most linux systems have a file called /etc/sysctl.conf, and most linux 
> systems
> > read the contents of that file and set the variables accordingly, this 
> is what
> > I have in mine(2.2.19 kernel):
> > fs/file-max = 32768
> > fs/inode-max = 65536
> > vm/freepages = 1024 2048 3072
> > then I use the command sysctl -p to read the file. If you set the variables
> > directly with echo, there is no need to reboot, the change is immediate.
> > for you I think the entry would be:
> > vm/bdflush = 100 500 200
> > the system should automatically parse and load the sysctl.conf upon 
> reboot. If
> > it does not, create a script or edit an existing one so that sysctl is run
> > upon
> > boot so it can load the settings
> > good luck.
> > nate
> > _______________________________________________
> >
> > _______________________________________________
> > eepro100 mailing list
> > eepro100@scyld.com
> > http://www.scyld.com/mailman/listinfo/eepro100
> >