[eepro100] eepro100 doesn't work with 2.4.x kernel

Ben Greear greearb@candelatech.com
Sat, 05 May 2001 12:29:04 -0700


Chandramouli wrote:
> 
> Hi All,
> 
>    I'm using SuSE 7.1 with 2.4.0 kernel.  While installing the OS itself
> I configured eepro100 card ( dual ported ).
> Once the machine came up it worked fine but once the machine was
> rebooted it stopped working.  The same with
> 2.4.4 kernel. But with 2.2.18 kernel it simply works fine. On the same
> machine I have both the kernels ( 2.2.18 and 2.4.4 ).
> 
> On the console it throws the error
> modprobe: can't locate the module.......

Check your /etc/modules.conf

You may need to do something like this to get it working again:

ifconfig eth0 down
ifconfig eth1 down
rmmod e100  # Intel's eepro driver, which actually works better for me...
insmod eepro100
ifup eth0
ifup eth1
...

Note that if you compile the kernel yourself, you will no longer
have the e100.o module, and you may have to re-compile the e100
driver (get it from intel's web site..and follow their install directions...)

Enjoy,
Ben
> 
> ANy help will be appreciated ...
> 
> Regds
> Mouli
> --
> -----------------------------------------------------------------------------------------------------------------------------
> 
> Wipro Technologies
> Compaq IDC
> "Sri Chamundi Complex"
> #26, Bommanahalli
> Hosur Main Road
> Bangalore - 560 068
> 
> Ph: 91-80-5732296, 98451-89915/6/7/8  ext 2106
> -----------------------------------------------------------------------------------------------------------------------------
> 
> _______________________________________________
> eepro100 mailing list
> eepro100@scyld.com
> http://www.scyld.com/mailman/listinfo/eepro100

-- 
Ben Greear <greearb@candelatech.com>          <Ben_Greear@excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear