[eepro100] Lockup with Intel PRO/100+ Dual Port Server Adapter

Thomas Lorenzen tl@theory.ki.ku.dk
Sun, 14 Jan 2001 12:28:51 +0100 (CET)


     Hi'

On Sat, 13 Jan 2001, Donald Becker wrote:

>>> On Sat, 13 Jan 2001, Thomas Lorenzen wrote:
>>> 
>>> > eth1      Link encap:Ethernet  HWaddr 00:03:47:3B:27:EE  
>>> >           inet addr:192.168.200.201  Bcast:192.168.200.255 Mask:255.255.255.0
>>> ...
>>> > eth2      Link encap:Ethernet  HWaddr 00:03:47:3B:27:EF  
>>> >           inet addr:192.168.200.202  Bcast:192.168.200.255 Mask:255.255.255.0
>>> 
>>> Note that the interfaces both have the same station address.
>>> You must run trunking on the switch if they are both on the same network
>>> segment.

   Oups, this sounds like some black talk to me. Do you mean
the HWaddr fields. These are different to my eyes. Yes, I
plan on putting both interfaces on the same network
192.168.200.xxx, but is that a problem. I am not sure about
what trunking on the switch means.

>>> >   9:      13270          XT-PIC  eth1
>>> >  12:      55770          XT-PIC  eth0, eth2
>>> 
>>> This is harmless.  I don't know why the BIOS picked this assignment, but
>>> it should work.
>>> 
>>> You might want to test that the BIOS did set up the mapping correctly:
>>> the packet count should approximatly equal the interrupt count.  Wait
>>> for an idle period (or unplug) on eth0 and put a bunch of traffic on
>>> eth1 and eth2.  Verify that the interrupt counts are increasing for both.

   I will dig into that later on, but a short test I just
did seems to do the expected thing.

   Best Regards.

     Thomas.

----------------------------------------------------------------------
Cand. Scient. Thomas Lorenzen               Phone : (+ 45) 35 32 02 50
Department of Chemistry                       Fax : (+ 45) 35 32 02 59
University of Copenhagen                     Mail : tl@theory.ki.ku.dk
DK, 2100 Copenhagen, Denmark   Homepage : http://theochem.ki.ku.dk/~tl
----------------------------------------------------------------------