[eepro100] errors with > 200k transfers

[Donald Becker]

On Mon, 10 Dec 2001, Darrell Schiebel wrote:

> Date: Mon, 10 Dec 2001 14:34:13 -0500
> From: Darrell Schiebel <drs@nrao.edu>
> To: Donald Becker <becker@scyld.com>
> Cc: eepro100@scyld.com, drs@nrao.edu
> Subject: Re: [eepro100] errors with > 200k transfers
> 
> Donald Becker wrote:
> 
> > On Mon, 10 Dec 2001, Darrell Schiebel wrote:
> > > On Sunday, December 9 2001 at 11:57EST, Donald Becker wrote:
> > > >On Fri, 7 Dec 2001, Darrell Schiebel wrote:
> > > >
> > > >> I have a (great) IBM ThinkPad X22. However, I get errors from the
..
> > > >> Communications Daughter Card / Intel 82562ET chipset". Linux picks the
...
> > > >Run 'eepro100-diag' and see if the "sleep mode" bit is set in the
> > > >EEPROM.  If so, run
> > > >    eepro100-diag -G 0 -w -w -f
> > > >to clear the bit.
> > >
> > >       Thanks for the suggestion.. however, eepro100-diag doesn't seem
> > >       to interface with the adapter correctly... when I first tried to
> > >       run eepro100-diag, it reported:

OK, I've released a new version of eepro100-diag.  Here is the CVS entry
________________
v2.06 12/10/2001

Added Intel Pro/100 VE (type 1031) entry.
Improved the sleep mode message.
________________

> Well, it didn't mean too much to me... the info is below.
> Where do you find the I/O address to supply with '-p <io-addr>'?

The /proc/pci entry had the address as 0x8000


Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993