eth0 errors reported on boot after improper shutdown

[Donald Becker]

On Tue, 18 Apr 2000, Jeremy Domingue wrote:

> Well, I have a very interesting problem that I'm hoping someone might be
> able to give me some insight on. Let me start at the beginning..... we had a
...
> Apr 17 21:04:35 hawk kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> Apr 17 21:04:35 hawk kernel: eepro100.c: $Revision: 1.18 $ 1999/12/29
> Modified by Andrey V. Savochkin <saw@msu.ru>
...
> Apr 17 21:04:35 hawk kernel: eth0: card reports no RX buffers.
> Apr 17 21:04:35 hawk kernel: eth0: card reports no resources.

Those are new messages in Andrey's branch.  It's not clear what the problem
is here.

You might try version 1.10a in the "netdriver" SRPM at
  ftp://www.scyld.com/pub/network/

A recent change has been the addition of a fall-back polling mode.  This
isn't intended as a regular operating mode, only as a way to emit an
understandable message and get a little network traffic throght when the
APIC code fails to configure a working IRQ setting.

Donald Becker				becker@scyld.com
Scyld Computing Corporation
410 Severn Ave. Suite 210
Annapolis MD 21403


-------------------------------------------------------------------
To unsubscribe send a message body containing "unsubscribe"
to linux-eepro100-request@beowulf.org