Transmitter Times out
John Beatty
bmyst@idsi.net
Tue Sep 21 20:55:38 1999
Donald,
Hello I'm John Beatty and first of all I want to thank you for all the
great
work you have done in writing the Linux ethernet drivers. I also want to
ask
you a question in hopes you would be the person that might know.
I have two machines at home that are very similar but not the
same. Both machines are SMP Pentium setups one from IBM and one I made
from
parts. The IBM machine has two Pentium II processors running at 350 MHZ
and the
box I made has 2 Pentium IIIs running at 450 MHZ. Both machines have the
Intel
Ethernet setup chips 82557 and 82558. The
IBM box will operate the ether net either in uni-processor or smp
variants. The
other box will only operate the ether net reliably as a uni-processor.
When its
booted as an SMP it typically indicates it starts OK but then the
transmitter
keeps timing. I'm running Redhat V6.0 or more specifically kernel
2.2.5-15 on both machines. The kernel detects the ethernet card as an
eepro100 and I believe that to be the
correct driver for my chip set.
I have contacted Redhat support and they seem to be at a loss.
I'll go through the things I've tried.
1) I tried using the options in /etc/conf.modules but the only one I
found
that works with the eepro100 turns on the debugging messages.
2) I tried making kernel 2.2.12 and that fails in the same way.
3) I tried flashing the BIOS to make sure the latest Pentium III fixes
are in
place again no help.
4) Tried uni-processor variation and that works reliably.
5) The SMP variation fails with transmitter time-outs
The error messages I see are like this:
Sep 19 11:21:23 F18Hornet kernel: eth0: Trying to restart the
transmitter...
Sep 19 11:21:28 F18Hornet kernel: eth0: Transmit timed out: status 7048
0000 at 0/16 command 0001a000.
I'm appending the /proc/interrupts and selected snipits from
/var/log/messages
in hopes if you could identify what I'm doing wrong. If I haven't sent
you enough information please email me and I'll try to get to you as
fast as I can.
Thanks again for your help,
John B.
[root@F18Hornet btree]# cat /proc/interrupts
CPU0 CPU1
0: 119483 114954 IO-APIC-edge timer
1: 2640 2808 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
3: 847 445 IO-APIC-edge serial
5: 33 37 IO-APIC-level aic7xxx, Intel EtherExpress
Pro 10/100 Ethernet
7: 56687 65142 IO-APIC-edge soundblaster
8: 1 1 IO-APIC-edge rtc
12: 27495 26304 IO-APIC-edge PS/2 Mouse
13: 1 0 XT-PIC fpu
14: 12893 15300 IO-APIC-edge ide0
15: 7 0 IO-APIC-edge ide1
NMI: 0
ERR: 0
/var/log/messages:
Sep 19 11:19:29 F18Hornet kernel: Processors: 2
Sep 19 11:19:29 F18Hornet kernel: mapped APIC to ffffe000 (fee00000)
Sep 19 11:19:29 F18Hornet kernel: mapped IOAPIC to ffffd000 (fec00000)
Sep 19 11:19:29 F18Hornet kernel: Detected 451026478 Hz processor.
Sep 19 11:19:29 F18Hornet kernel: Console: colour VGA+ 80x25
Sep 19 11:19:29 F18Hornet kernel: Calibrating delay loop... 448.92
BogoMIPS
Sep 19 11:19:29 F18Hornet kernel: Memory: 257336k/262144k available
(1100k kernel code, 416k reserved, 2896k data, 72k init)
Sep 19 11:19:29 F18Hornet kernel: VFS: Diskquotas version dquot_6.4.0
initialized
Sep 19 11:19:29 F18Hornet kernel: Checking 386/387 coupling... OK, FPU
using exception 16 error reporting.
Sep 19 11:19:29 F18Hornet kernel: Checking 'hlt' instruction... OK.
Sep 19 11:19:29 F18Hornet kernel: POSIX conformance testing by UNIFIX
Sep 19 11:19:29 F18Hornet kernel: mtrr: v1.26 (19981001) Richard Gooch
(rgooch@atnf.csiro.au)
Sep 19 11:19:29 F18Hornet kernel: per-CPU timeslice cutoff: 100.00
usecs.
Sep 19 11:19:29 F18Hornet kernel: CPU0: Intel 00/07 stepping 02
Sep 19 11:19:29 F18Hornet kernel: calibrating APIC timer ...
Sep 19 11:19:29 F18Hornet kernel: ..... CPU clock speed is 451.0054 MHz.
Sep 19 11:19:29 F18Hornet kernel: ..... system bus clock speed is
100.2232 MHz.
Sep 19 11:19:29 F18Hornet kernel: Booting processor 1 eip 2000
Sep 19 11:19:29 F18Hornet kernel: Calibrating delay loop... 450.56
BogoMIPS
Sep 19 11:19:29 F18Hornet kernel: OK.
Sep 19 11:19:29 F18Hornet kernel: CPU1: Intel 00/07 stepping 02
Sep 19 11:19:29 F18Hornet kernel: Total of 2 processors activated
(899.48 BogoMIPS).
Sep 19 11:19:29 F18Hornet kernel: enabling symmetric IO mode... ...done.
Sep 19 11:19:29 F18Hornet kernel: ENABLING IO-APIC IRQs
Sep 19 11:19:29 F18Hornet kernel: init IO_APIC IRQs
Sep 19 11:19:29 F18Hornet kernel: IO-APIC pin 0, 5, 10, 11, 17, 20, 21,
22, 23 not connected.
Sep 19 11:19:29 F18Hornet kernel: number of MP IRQ sources: 16.
Sep 19 11:19:29 F18Hornet kernel: number of IO-APIC registers: 24.
Sep 19 11:19:29 F18Hornet kernel: testing the IO
APIC.......................
Sep 19 11:19:29 F18Hornet kernel: .... register #00: 02000000
Sep 19 11:19:29 F18Hornet kernel: ....... : physical APIC id: 02
Sep 19 11:19:29 F18Hornet kernel: .... register #01: 00170011
Sep 19 11:19:29 F18Hornet kernel: ....... : max redirection entries:
0017
Sep 19 11:19:29 F18Hornet kernel: ....... : IO APIC version: 0011
Sep 19 11:19:29 F18Hornet kernel: .... register #02: 00000000
Sep 19 11:19:29 F18Hornet kernel: ....... : arbitration: 00
Sep 19 11:19:30 F18Hornet atd: atd startup succeeded
Sep 19 11:19:29 F18Hornet kernel: .... IRQ redirection table:
Sep 19 11:19:29 F18Hornet kernel: NR Log Phy Mask Trig IRR Pol Stat
Dest Deli Vect:
Sep 19 11:19:29 F18Hornet kernel: 00 000 00 1 0 0 0 0
0 0 00
Sep 19 11:19:29 F18Hornet kernel: 01 000 00 0 0 0 0 0
1 1 59
Sep 19 11:19:29 F18Hornet kernel: 02 0FF 0F 0 0 0 0 0
1 1 51
Sep 19 11:19:29 F18Hornet kernel: 03 000 00 0 0 0 0 0
1 1 61
Sep 19 11:19:29 F18Hornet kernel: 04 000 00 0 0 0 0 0
1 1 69
Sep 19 11:19:29 F18Hornet kernel: 05 000 00 1 0 0 0 0
0 0 00
Sep 19 11:19:29 F18Hornet kernel: 06 000 00 0 0 0 0 0
1 1 71
Sep 19 11:19:29 F18Hornet kernel: 07 000 00 0 0 0 0 0
1 1 79
Sep 19 11:19:29 F18Hornet kernel: 08 000 00 0 0 0 0 0
1 1 81
Sep 19 11:19:29 F18Hornet kernel: 09 000 00 0 0 0 0 0
1 1 89
Sep 19 11:19:29 F18Hornet kernel: 0a 000 00 1 0 0 0 0
0 0 00
Sep 19 11:19:29 F18Hornet kernel: 0b 000 00 1 0 0 0 0
0 0 00
Sep 19 11:19:29 F18Hornet kernel: 0c 000 00 0 0 0 0 0
1 1 91
Sep 19 11:19:29 F18Hornet kernel: 0d 000 00 1 0 0 0 0
0 0 00
Sep 19 11:19:29 F18Hornet kernel: 0e 000 00 0 0 0 0 0
1 1 99
Sep 19 11:19:29 F18Hornet kernel: 0f 000 00 0 0 0 0 0
1 1 A1
Sep 19 11:19:29 F18Hornet kernel: 10 0FF 0F 1 1 0 1 0
1 1 A9
Sep 19 11:19:29 F18Hornet kernel: 11 000 00 1 0 0 0 0
0 0 00
Sep 19 11:19:29 F18Hornet kernel: 12 0FF 0F 1 1 0 1 0
1 1 B1
Sep 19 11:19:29 F18Hornet kernel: 13 0FF 0F 1 1 0 1 0
1 1 B9
Sep 19 11:19:29 F18Hornet kernel: 14 000 00 1 0 0 0 0
0 0 00
Sep 19 11:19:29 F18Hornet kernel: 15 000 00 1 0 0 0 0
0 0 00
Sep 19 11:19:29 F18Hornet kernel: 16 000 00 1 0 0 0 0
0 0 00
Sep 19 11:19:29 F18Hornet kernel: 17 000 00 1 0 0 0 0
0 0 00
Sep 19 07:19:19 F18Hornet rc.sysinit: Loading default keymap succeeded
Sep 19 07:19:19 F18Hornet rc.sysinit: Setting default font succeeded
Sep 19 07:19:19 F18Hornet swapon: swapon: warning: /dev/hda5 has
insecure permissions 0660, 0600 suggested
Sep 19 07:19:19 F18Hornet swapon: swapon: warning: /dev/hda6 has
insecure permissions 0660, 0600 suggested
Sep 19 07:19:19 F18Hornet swapon: swapon: warning: /dev/hda7 has
insecure permissions 0660, 0600 suggested
Sep 19 07:19:19 F18Hornet swapon: swapon: warning: /dev/hda8 has
insecure permissions 0660, 0600 suggested
Sep 19 07:19:19 F18Hornet rc.sysinit: Activating swap partitions
succeeded
Sep 19 07:19:19 F18Hornet rc.sysinit: Setting hostname F18Hornet
succeeded
Sep 19 07:19:19 F18Hornet fsck: /dev/hda9: clean, 133074/2326528 files,
3548417/9301603 blocks
Sep 19 07:19:19 F18Hornet rc.sysinit: Checking root filesystem succeeded
Sep 19 07:19:19 F18Hornet isapnp: Board 1 has Identity ec 14 4a 60 59 e4
00 8c 0e: CTL00e4 Serial No 340418649 [checksum ec]
Sep 19 11:19:29 F18Hornet kernel: ....................................
done.
Sep 19 11:19:29 F18Hornet kernel: mtrr: your CPUs had inconsistent
variable MTRR settings
Sep 19 11:19:29 F18Hornet kernel: mtrr: probably your BIOS does not
setup all CPUs
Sep 19 11:19:29 F18Hornet kernel: PCI: PCI BIOS revision 2.10 entry at
0xfafc0
Sep 19 11:19:29 F18Hornet kernel: PCI: Using configuration type 1
Sep 19 11:19:29 F18Hornet kernel: PCI: Probing PCI hardware
Sep 19 11:19:29 F18Hornet kernel: Linux NET4.0 for Linux 2.2
Sep 19 07:19:19 F18Hornet isapnp:
CTL00e4/340418649[0]{Audio }: Ports 0x220 0x300 0x388;
IRQ7 DMA0 DMA5 --- Enabled OK
Sep 19 07:19:19 F18Hornet isapnp:
CTL00e4/340418649[1]{Game }: Port 0x200; --- Enabled OK
Sep 19 07:19:19 F18Hornet isapnp:
CTL00e4/340418649[2]{WaveTable }: Ports 0x620 0xA20 0xE20; ---
Enabled OK
Sep 19 07:19:19 F18Hornet rc.sysinit: Setting up ISA PNP devices
succeeded
Sep 19 07:19:19 F18Hornet rc.sysinit: Remounting root filesystem in
read-write mode succeeded
Sep 19 07:19:23 F18Hornet rc.sysinit: Finding module dependencies
succeeded
Sep 19 07:19:23 F18Hornet rc.sysinit: Loading sound module succeeded
Sep 19 07:19:24 F18Hornet rc.sysinit: Loading midi module succeeded
Sep 19 07:19:24 F18Hornet fsck: /dev/hda1: clean, 36/6024 files,
10830/24066 blocks
Sep 19 07:19:24 F18Hornet rc.sysinit: Checking filesystems succeeded
Sep 19 07:19:24 F18Hornet rc.sysinit: Mounting local filesystems
succeeded
Sep 19 07:19:24 F18Hornet rc.sysinit: Turning on user and group quotas
for local filesystems succeeded
Sep 19 11:19:26 F18Hornet date: Sun Sep 19 11:19:26 EDT 1999
Sep 19 11:19:29 F18Hornet kernel: Based upon Swansea University Computer
Society NET3.039
Sep 19 11:19:29 F18Hornet kernel: NET4: Unix domain sockets 1.0 for
Linux NET4.0.
Sep 19 11:19:29 F18Hornet kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Sep 19 11:19:29 F18Hornet kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Sep 19 11:19:29 F18Hornet kernel: Initializing RT netlink socket
Sep 19 11:19:29 F18Hornet kernel: Starting kswapd v 1.5
Sep 19 11:19:29 F18Hornet kernel: Detected PS/2 Mouse Port.
Sep 19 11:19:29 F18Hornet kernel: Serial driver version 4.27 with
MANY_PORTS MULTIPORT SHARE_IRQ enabled
Sep 19 11:19:29 F18Hornet kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Sep 19 11:19:29 F18Hornet kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Sep 19 11:19:29 F18Hornet kernel: ttyS03 at 0x02e8 (irq = 3) is a 16550A
Sep 19 11:19:29 F18Hornet kernel: pty: 256 Unix98 ptys configured
Sep 19 11:19:29 F18Hornet kernel: apm: BIOS version 1.2 Flags 0x07
(Driver version 1.9)
Sep 19 11:19:29 F18Hornet kernel: apm: disabled - APM is not SMP safe.
Sep 19 11:19:29 F18Hornet kernel: Real Time Clock Driver v1.09
Sep 19 11:19:26 F18Hornet rc.sysinit: Setting clock : Sun Sep 19
11:19:26 EDT 1999 succeeded
Sep 19 11:19:26 F18Hornet rc.sysinit: Enabling swap space succeeded
Sep 19 11:19:26 F18Hornet init: Entering runlevel: 5
Sep 19 11:19:28 F18Hornet network: Bringing up interface lo succeeded
Sep 19 11:19:28 F18Hornet network: Bringing up interface eth0 succeeded
Sep 19 11:19:28 F18Hornet network: Bringing up interface ppp0 succeeded
Sep 19 11:19:28 F18Hornet portmap: portmap startup succeeded
Sep 19 11:19:28 F18Hornet ypserv: ypserv startup succeeded
Sep 19 11:19:28 F18Hornet random: Initializing random number generator
succeeded
Sep 19 11:19:31 F18Hornet crond: crond startup succeeded
Sep 19 11:19:29 F18Hornet kernel: RAM disk driver initialized: 16 RAM
disks of 4096K size
Sep 19 11:19:29 F18Hornet kernel: PIIX4: IDE controller on PCI bus 00
dev 39
Sep 19 11:19:29 F18Hornet kernel: PIIX4: not 100% native mode: will
probe irqs later
Sep 19 11:19:29 F18Hornet kernel: ide0: BM-DMA at 0xf000-0xf007,
BIOS settings: hda:pio, hdb:pio
Sep 19 11:19:29 F18Hornet kernel: ide1: BM-DMA at 0xf008-0xf00f,
BIOS settings: hdc:pio, hdd:pio
Sep 19 11:19:29 F18Hornet kernel: hda: IBM-DTTA-371010, ATA DISK drive
Sep 19 11:19:29 F18Hornet kernel: hda: IBM-DTTA-371010, ATA DISK drive
Sep 19 11:19:29 F18Hornet kernel: hdb: ST36530A, ATA DISK drive
Sep 19 11:19:29 F18Hornet kernel: hdc: Hewlett-Packard CD-Writer Plus
8100, ATAPI CDROM drive
Sep 19 11:19:29 F18Hornet kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep 19 11:19:29 F18Hornet kernel: ide1 at 0x170-0x177,0x376 on irq 15
Sep 19 11:19:29 F18Hornet kernel: hda: IBM-DTTA-371010, 9641MB w/465kB
Cache, CHS=1229/255/63, UDMA
Sep 19 11:19:29 F18Hornet kernel: hdb: ST36530A, 6149MB w/448kB Cache,
CHS=784/255/63, UDMA
Sep 19 11:19:29 F18Hornet kernel: hdc: ATAPI 24X CD-ROM DVD-RAM CD-R/RW
drive, 1024kB Cache
Sep 19 11:19:31 F18Hornet inet: inetd startup succeeded
Sep 19 11:19:29 F18Hornet kernel: Uniform CDROM driver Revision: 2.54
Sep 19 11:19:29 F18Hornet kernel: Floppy drive(s): fd0 is 1.44M
Sep 19 11:19:29 F18Hornet kernel: FDC 0 is a post-1991 82077
Sep 19 11:19:29 F18Hornet kernel: md driver 0.90.0 MAX_MD_DEVS=256,
MAX_REAL=12
Sep 19 11:19:29 F18Hornet kernel: raid5: measuring checksumming speed
Sep 19 11:19:29 F18Hornet kernel: raid5: using high-speed MMX checksum
routine
Sep 19 11:19:29 F18Hornet kernel: pII_mmx : 1076.706 MB/sec
Sep 19 11:19:29 F18Hornet kernel: p5_mmx : 1051.560 MB/sec
Sep 19 11:19:29 F18Hornet kernel: 8regs : 777.621 MB/sec
Sep 19 11:19:29 F18Hornet kernel: 32regs : 558.165 MB/sec
Sep 19 11:19:29 F18Hornet kernel: using fastest function: pII_mmx
(1076.706 MB/sec)
Sep 19 11:19:29 F18Hornet kernel: scsi : 0 hosts.
Sep 19 11:19:29 F18Hornet kernel: scsi : detected total.
Sep 19 11:19:29 F18Hornet kernel: md.c: sizeof(mdp_super_t) = 4096
Sep 19 11:19:29 F18Hornet kernel: Partition check:
Sep 19 11:19:29 F18Hornet kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8
hda9 >
Sep 19 11:19:29 F18Hornet kernel: hdb: hdb1 hdb2 < hdb5 >
Sep 19 11:19:29 F18Hornet kernel: RAMDISK: Compressed image found at
block 0
Sep 19 11:19:29 F18Hornet kernel: autodetecting RAID arrays
Sep 19 11:19:29 F18Hornet kernel: autorun ...
Sep 19 11:19:29 F18Hornet kernel: ... autorun DONE.
Sep 19 11:19:29 F18Hornet kernel: VFS: Mounted root (ext2 filesystem).
Sep 19 11:19:29 F18Hornet kernel: (scsi0) <Adaptec AIC-7880 Ultra SCSI
host adapter> found at PCI 8/0
Sep 19 11:19:29 F18Hornet kernel: (scsi0) Narrow Channel, SCSI ID=7,
16/255 SCBs
Sep 19 11:19:29 F18Hornet kernel: (scsi0) Warning - detected
auto-termination
Sep 19 11:19:29 F18Hornet kernel: (scsi0) Please verify driver detected
settings are correct.
Sep 19 11:19:29 F18Hornet kernel: (scsi0) If not, then please properly
set the device termination
Sep 19 11:19:29 F18Hornet kernel: (scsi0) in the Adaptec SCSI BIOS by
hitting CTRL-A when prompted
Sep 19 11:19:29 F18Hornet kernel: (scsi0) during machine bootup.
Sep 19 11:19:29 F18Hornet kernel: (scsi0) Cables present (Int-50 YES,
Ext-50 YES)
Sep 19 11:19:29 F18Hornet kernel: (scsi0) Downloading sequencer code...
413 instructions downloaded
Sep 19 11:19:32 F18Hornet named[387]: starting. named 8.2 Wed Mar 31
10:57:12 EST 1999
^Iroot@porky.devel.redhat.com:/usr/src/bs/BUILD/bind-8.2/src/bin/named
Sep 19 11:19:33 F18Hornet named[387]: cache zone "" (IN) loaded (serial
0)
Sep 19 11:19:33 F18Hornet named[387]: listening on [127.0.0.1].53 (lo)
Sep 19 11:19:33 F18Hornet named[387]: listening on [192.168.1.254].53
(eth0)
Sep 19 11:19:33 F18Hornet named[387]: Forwarding source address is
[0.0.0.0].1024
Sep 19 11:19:29 F18Hornet kernel: scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.15/3.2.4
Sep 19 11:19:29 F18Hornet kernel: <Adaptec AIC-7880 Ultra SCSI
host adapter>
Sep 19 11:19:29 F18Hornet kernel: scsi : 1 host.
Sep 19 11:19:29 F18Hornet kernel: (scsi0:0:0:0) Using asynchronous
transfers.
Sep 19 11:19:29 F18Hornet kernel: Vendor: EXABYTE Model:
EXB-8200 Rev: IRM4
Sep 19 11:19:29 F18Hornet kernel: Type:
Sequential-Access ANSI SCSI revision: 01 CCS
Sep 19 11:19:29 F18Hornet kernel: Detected scsi tape st0 at scsi0,
channel 0, id 0, lun 0
Sep 19 11:19:29 F18Hornet kernel: (scsi0:0:1:0) Using asynchronous
transfers.
Sep 19 11:19:29 F18Hornet kernel: Vendor: TANDBERG Model: TDC
3600 Rev: U07:
Sep 19 11:19:29 F18Hornet kernel: Type:
Sequential-Access ANSI SCSI revision: 01
Sep 19 11:19:29 F18Hornet kernel: Detected scsi tape st1 at scsi0,
channel 0, id 1, lun 0
Sep 19 11:19:29 F18Hornet kernel: autodetecting RAID arrays
Sep 19 11:19:29 F18Hornet kernel: autorun ...
Sep 19 11:19:29 F18Hornet kernel: ... autorun DONE.
Sep 19 11:19:33 F18Hornet named[388]: Ready to answer queries.
Sep 19 11:19:33 F18Hornet named[388]: sysquery:
sendto([128.8.10.90].53): Network is unreachable
Sep 19 11:19:33 F18Hornet named[388]: Lame server on 'home' (in ''?):
[192.168.1.254].53
Sep 19 11:19:33 F18Hornet named[388]: Err/TO getting serial# for "home"
Sep 19 11:19:33 F18Hornet named[388]: attempted to fetch zone home from
self (192.168.1.254)
Sep 19 11:19:33 F18Hornet named: named startup succeeded
Sep 19 11:19:29 F18Hornet kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Sep 19 11:19:29 F18Hornet kernel: change_root: old root has d_count=1
Sep 19 11:19:29 F18Hornet kernel: Trying to unmount old root ... okay
Sep 19 11:19:29 F18Hornet kernel: Freeing unused kernel memory: 72k
freed
Sep 19 11:19:29 F18Hornet kernel: Adding Swap: 136516k swap-space
(priority -1)
Sep 19 11:19:29 F18Hornet kernel: Adding Swap: 136516k swap-space
(priority -2)
Sep 19 11:19:29 F18Hornet kernel: Adding Swap: 136516k swap-space
(priority -3)
Sep 19 11:19:29 F18Hornet kernel: Adding Swap: 136516k swap-space
(priority -4)
Sep 19 11:19:29 F18Hornet kernel: Soundblaster audio driver Copyright
(C) by Hannu Savolainen 1993-1996
Sep 19 11:19:29 F18Hornet kernel: SB 4.16 detected OK (220)
Sep 19 11:19:29 F18Hornet kernel: <SoundBlaster EMU8000 (RAM512k)>
Sep 19 11:19:29 F18Hornet kernel: eepro100.c:v1.06 10/16/98 Donald
Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Sep 19 11:19:29 F18Hornet kernel: Found Intel i82557 PCI Speedo at I/O
0xe800, IRQ 5.
Sep 19 11:19:29 F18Hornet kernel: PCI latency timer (CFLT) is 0x40.
Sep 19 11:19:33 F18Hornet routed: routed startup succeeded
Sep 19 11:19:29 F18Hornet kernel: eepro100.c:v1.06 10/16/98 Donald
Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Sep 19 11:19:29 F18Hornet kernel: eth0: Intel EtherExpress Pro 10/100 at
0xe800, 00:10:5C:AB:22:F4, IRQ 5.
Sep 19 11:19:29 F18Hornet kernel: Board assembly 691334-003, Physical
connectors present: RJ45
Sep 19 11:19:29 F18Hornet kernel: Primary interface chip i82555 PHY
#1.
Sep 19 11:19:29 F18Hornet kernel: General self-test: passed.
Sep 19 11:19:29 F18Hornet kernel: Serial sub-system self-test: passed.
Sep 19 11:19:29 F18Hornet kernel: Internal registers self-test:
passed.
Sep 19 11:19:29 F18Hornet kernel: Receiver lock-up workaround
activated.
Sep 19 11:19:34 F18Hornet lpd: lpd startup succeeded
Sep 19 11:19:34 F18Hornet nfs: Starting NFS services: succeeded
Sep 19 11:19:35 F18Hornet nfs: rpc.statd startup succeeded
Sep 19 11:19:36 F18Hornet nfs: rpc.rquotad startup succeeded
Sep 19 11:19:36 F18Hornet nfs: rpc.mountd startup succeeded
Sep 19 11:19:36 F18Hornet kernel: Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
Sep 19 11:19:36 F18Hornet nfs: rpc.nfsd startup succeeded
Sep 19 11:19:36 F18Hornet keytable: Loading keymap:
Sep 19 11:19:37 F18Hornet keytable: Loading
/usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Sep 19 11:19:37 F18Hornet keytable: Loading system font:
Sep 19 11:19:37 F18Hornet rc: Starting keytable succeeded
Sep 19 11:19:37 F18Hornet gpm: gpm startup succeeded
Sep 19 11:19:38 F18Hornet httpd: httpd startup succeeded
Sep 19 11:19:38 F18Hornet sound: Starting sound configuration:
Sep 19 11:19:38 F18Hornet sound: sound
Sep 19 11:19:38 F18Hornet sound:
Sep 19 11:19:38 F18Hornet rc: Starting sound succeeded
Sep 19 11:19:38 F18Hornet PAM_pwdb[555]: (su) session opened for user
xfs by (uid=0)
Sep 19 11:19:39 F18Hornet PAM_pwdb[555]: (su) session closed for user
xfs
Sep 19 11:19:39 F18Hornet xfs: xfs startup succeeded
Sep 19 11:19:39 F18Hornet linuxconf: Linuxconf final setup
Sep 19 11:19:39 F18Hornet rc: Starting linuxconf succeeded
Sep 19 11:19:40 F18Hornet rc: Starting local succeeded
Sep 19 11:19:41 F18Hornet gdm[603]: gdm_auth_secure_display: Could not
unlink /var/gdm/:0.xauth file: No such file or directory
Sep 19 11:19:54 F18Hornet PAM_pwdb[610]: (gdm) session opened for user
root by (uid=0)
Sep 19 11:20:02 F18Hornet gnome-name-server[689]: starting
Sep 19 11:20:02 F18Hornet gnome-name-server[689]: name server starting
Sep 19 11:20:02 F18Hornet gnome-name-server[691]: starting
Sep 19 11:20:02 F18Hornet gnome-name-server[691]: name server was
running on display, exiting
Sep 19 11:20:58 F18Hornet kernel: eth0: Transmit timed out: status 7048
0000 at 0/16 command 0001a000.
Sep 19 11:20:58 F18Hornet kernel: eth0: Trying to restart the
transmitter...
Sep 19 11:21:03 F18Hornet kernel: eth0: Transmit timed out: status 7048
0000 at 0/16 command 0001a000.
Sep 19 11:21:03 F18Hornet kernel: eth0: Trying to restart the
transmitter...
Sep 19 11:21:08 F18Hornet kernel: eth0: Transmit timed out: status 7048
0000 at 0/16 command 0001a000.
Sep 19 11:21:08 F18Hornet kernel: eth0: Trying to restart the
transmitter...
Sep 19 11:21:13 F18Hornet kernel: eth0: Transmit timed out: status 7048
0000 at 0/16 command 0001a000.
Sep 19 11:21:13 F18Hornet kernel: eth0: Trying to restart the
transmitter...
Sep 19 11:21:18 F18Hornet kernel: eth0: Transmit timed out: status 7048
0000 at 0/16 command 0001a000.
Sep 19 11:21:18 F18Hornet kernel: eth0: Trying to restart the
transmitter...
Sep 19 11:21:23 F18Hornet kernel: eth0: Transmit timed out: status 7048
0000 at 0/16 command 0001a000.
Sep 19 11:21:23 F18Hornet kernel: eth0: Trying to restart the
transmitter...
Sep 19 11:21:28 F18Hornet kernel: eth0: Transmit timed out: status 7048
0000 at 0/16 command 0001a000.
Sep 19 11:21:28 F18Hornet kernel: eth0: Trying to restart the
transmitter...