eepro100 wows

drc@ns1.theeii.net drc@ns1.theeii.net
Wed Jul 29 00:22:53 1998


Mr. Becker:

Hi I just upgraded my system to a P11 300Mhz with the Intel 440BX chipset.
now the ethernet card that I was using in my old P150 is not working. Here
is the error message when it hits init()

eepro100.c:v0.99B 4/7/98 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov
eepro100.c:v0.99B 4/7/98 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov
eth0: Intel EtherExpress Pro 10/100 at 0xef40, 00:A0:C9:5D:7A:5C, IRQ 7.
  Board assembly 667280-003, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
Self test failed, status ffffffff:
 Failure to initialize the i82557.
 Verify that the card is a bus-master capable slot.
  Receiver lock-up workaround activated.
eth0: Transmit timed out: status 0000 command 0020.
eth0: Trying to restart the transmitter...
eth0: Transmit timed out: status 0000 command 0010.



Can you tell me what to do to fix this problem please.

Reply to "dcrawford@talleytech.com"

This site/linuxbox may not have sendmail setup so the above address witll
work.