FW: Intel EtherExpress on Compaq Computer

Philippe Chaulot-Talmon Philippe.Chaulot-Talmon@nce.sita.int
Fri Aug 14 03:54:21 1998


Dear all,

I'm trying to install Linux RedHat 5.1 on a brand new Compaq EN computer
with embeded Intel EtherExpress NIC. The NIC is working except when I have
to transfer lot of data across the network. Suppose I do a
telnet, it's ok.
If I run a remote application with more than a few bytes to transfert, it
freeze. Same with ftp or rcp. Seems there is something with some
buffers or something like that.

Any idea?

Thanks a lot in advance.
Brgds, Philippe

> eepro100.c:v0.99B 4/7/98 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov
> Jul 16 06:56:39 lcnce6 kernel:   The PCI BIOS has not enabled this device!
> Updating PCI command 0003->0007.
> Jul 16 06:56:39 lcnce6 kernel: eepro100.c:v0.99B 4/7/98 Donald Becker
> linux-eepro100@cesdis.gsfc.nasa.gov
> Jul 16 06:56:39 lcnce6 kernel: eth0: OEM i82557/i82558 10/100 Ethernet at
> 0x2400, 00:08:C7:52:E4:69, IRQ 11.
> Jul 16 06:56:39 lcnce6 kernel:   Board assembly 702536-005, Physical
> connectors present: RJ45
> Jul 16 06:56:39 lcnce6 kernel:   Primary interface chip i82555 PHY #1.
> Jul 16 06:56:39 lcnce6 kernel:   General self-test: passed.
> Jul 16 06:56:39 lcnce6 kernel:   Serial sub-system self-test: passed.
> Jul 16 06:56:39 lcnce6 kernel:   Internal registers self-test: passed.
> Jul 16 06:56:39 lcnce6 kernel:   ROM checksum self-test: passed
> (0x24c9f043).
> Jul 16 06:56:39 lcnce6 kernel:   Receiver lock-up workaround activated.
>
>
>   .oooO
>   (   )             \\\////
>    \ (              (.) (.)
> o---\_)-Oooo.---oOO---(_)---OOo---- [ P. Chaulot-Talmon ]-----o
>         (   )
>          )  /
>          (_/       mailto:Philippe.Chaulot-Talmon@nce.sita.int
> SITA
> Heraklion 1041, Route des Dolines
> Sophia Antipolis                        Tel: +33 04.92.96.64.81
> 06560 Valbonne - France                 Fax: +33 04.92.96.63.94
> o---------------------------oOo-------------------------------o
>
>