[Beowulf] tyan ipmi

[Alex Chekholko]

Sometimes there is an option like "enable IPMI over network".  But you're
saying other things like power control over IPMI already works from a
remote host?

Have you tried asking your vendor for support?

On Tue, Aug 30, 2016 at 11:38 AM Michael Di Domenico <mdidomenico4 at gmail.com>
wrote:

>  i'm trying to get SOL working on a Tyan motherboard using freeipmi.
> but everything i run seems to give me "username invalid" when
> connecting remotely.  i can run corresponding ipmitool commands and
> they work fine and even if i run bmc-info on the box locally it works.
> it's only when i try to run bmc-info/ipmiconsole/etc from a remote box
> that i get the error.
>
> i've checked the username/password its correct and i can connect to
> the SOL interface using ipmitool so i'm pretty sure that everything i
> have is setup correctly.
>
> there must be something odd about connecting over the network that
> messes everything up.  i tried several of the workarounds listed in
> the manpage, but they didn't work
>
> any other thoughts?
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
> To change your subscription (digest mode or unsubscribe) visit
> http://www.beowulf.org/mailman/listinfo/beowulf
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.beowulf.org/pipermail/beowulf/attachments/20160830/f579b580/attachment.html>