[Beowulf] SuperMicro X7DWT-INF board - what connector? what cable?

[Donald J Holmgren]

We use the AMD version of this motherboard ("TwinU").  The landed Mellanox MT25204 HCA has a 4x microGiGaCN connector at the back of motherboard.  These are also often called CX4 connectors. 

Depending upon the switch you will connect the systems to, you need either microGiGaCN to microGiGaCN cables, or microGiGaCN to QSFP cables. Colfaxdirect.com lists many of each type. 

Supermicro.com has detailed specs and the manual for this motherboard. 

Don 



On Aug 29, 2012, at 5:05 AM, "Duke Nguyen" <duke.lists at gmx.com> wrote:

> Hi folks,
> 
> We plan to build a cluster using server built with SuperMicro X7DWT-INF 
> motherboards. Unfortunately google does not give us much information 
> about the type of connector that X7DWT-INF has.
> 
> Anybody using this motherboard in their cluster? Please give us advice 
> about which connector the board has and what infiniband cable we should 
> acquire to fit in the rack-mount servers built with these boards.
> 
> Thanks,
> 
> D.
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf