[Beowulf] Benchmarking?
Rajiv
jrajiv at hclinsys.com
Mon Aug 2 20:27:41 PDT 2004
Dear Michael,
I am sending below the output. Also find the attachment HPL.dat.
OUTPUT-1:
If my machines file has one entry client, the following is the output:
[hpl at master hpl]$ /opt/mpich/gnu/bin/mpirun -nolocal -np 2 -machinefile
machines /opt/hpl/gnu/bin/xhpl Warning: No xauth data; using fake
authentication data for X11 forwarding.
============================================================================
HPLinpack 1.0 -- High-Performance Linpack benchmark -- September 27,
2000
Written by A. Petitet and R. Clint Whaley, Innovative Computing Labs., UTK
============================================================================
An explanation of the input/output parameters follows:
T/V : Wall time / encoded variant.
N : The order of the coefficient matrix A.
NB : The partitioning blocking factor.
P : The number of process rows.
Q : The number of process columns.
Time : Time in seconds to solve the linear system.
Gflops : Rate of execution for solving the linear system.
The following parameter values will be used:
N : 1000
NB : 64
P : 1
Q : 2
PFACT : Left Crout Right
NBMIN : 8
NDIV : 2
RFACT : Right
BCAST : 1ringM
DEPTH : 1
SWAP : Mix (threshold = 80)
L1 : transposed form
U : transposed form
EQUIL : yes
ALIGN : 8 double precision words
----------------------------------------------------------------------------
- The matrix A is randomly generated for each test.
- The following scaled residual checks will be computed:
1) ||Ax-b||_oo / ( eps * ||A||_1 * N )
2) ||Ax-b||_oo / ( eps * ||A||_1 * ||x||_1 )
3) ||Ax-b||_oo / ( eps * ||A||_oo * ||x||_oo )
- The relative machine precision (eps) is taken to be 1.110223e-16
- Computational tests pass if scaled residuals are less than 16.0
============================================================================
T/V N NB P Q Time Gflops
----------------------------------------------------------------------------
W11R2L8 1000 64 1 2 0.29 2.294e+00
----------------------------------------------------------------------------
||Ax-b||_oo / ( eps * ||A||_1 * N ) = 1.0108964 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_1 * ||x||_1 ) = 0.0245358 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_oo * ||x||_oo ) = 0.0059277 ...... PASSED
============================================================================
T/V N NB P Q Time Gflops
----------------------------------------------------------------------------
W11R2C8 1000 64 1 2 0.26 2.617e+00
----------------------------------------------------------------------------
||Ax-b||_oo / ( eps * ||A||_1 * N ) = 1.0164336 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_1 * ||x||_1 ) = 0.0246702 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_oo * ||x||_oo ) = 0.0059601 ...... PASSED
============================================================================
T/V N NB P Q Time Gflops
----------------------------------------------------------------------------
W11R2R8 1000 64 1 2 0.26 2.592e+00
----------------------------------------------------------------------------
||Ax-b||_oo / ( eps * ||A||_1 * N ) = 0.9860995 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_1 * ||x||_1 ) = 0.0239340 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_oo * ||x||_oo ) = 0.0057823 ...... PASSED
============================================================================
Finished 3 tests with the following results:
3 tests completed and passed residual checks,
0 tests completed and failed residual checks,
0 tests skipped because of illegal input values.
----------------------------------------------------------------------------
End of Tests.
============================================================================
OUTPUT-2:
Output with two entries in the machine file, master and client
[hpl at master hpl]$ /opt/mpich/gnu/bin/mpirun -nolocal -np 4 -machinefile
machines /opt/hpl/gnu/bin/xhpl
Warning: No xauth data; using fake authentication data for X11 forwarding.
============================================================================
HPLinpack 1.0 -- High-Performance Linpack benchmark -- September 27,
2000
Written by A. Petitet and R. Clint Whaley, Innovative Computing Labs., UTK
============================================================================
An explanation of the input/output parameters follows:
T/V : Wall time / encoded variant.
N : The order of the coefficient matrix A.
NB : The partitioning blocking factor.
P : The number of process rows.
Q : The number of process columns.
Time : Time in seconds to solve the linear system.
Gflops : Rate of execution for solving the linear system.
The following parameter values will be used:
N : 1000
NB : 64
P : 1
Q : 2
PFACT : Left Crout Right
NBMIN : 8
NDIV : 2
RFACT : Right
BCAST : 1ringM
DEPTH : 1
SWAP : Mix (threshold = 80)
L1 : transposed form
U : transposed form
EQUIL : yes
ALIGN : 8 double precision words
----------------------------------------------------------------------------
- The matrix A is randomly generated for each test.
- The following scaled residual checks will be computed:
1) ||Ax-b||_oo / ( eps * ||A||_1 * N )
2) ||Ax-b||_oo / ( eps * ||A||_1 * ||x||_1 )
3) ||Ax-b||_oo / ( eps * ||A||_oo * ||x||_oo )
- The relative machine precision (eps) is taken to be 1.110223e-16
- Computational tests pass if scaled residuals are less than 16.0
============================================================================
T/V N NB P Q Time Gflops
----------------------------------------------------------------------------
W11R2L8 1000 64 1 2 0.38 1.775e+00
----------------------------------------------------------------------------
||Ax-b||_oo / ( eps * ||A||_1 * N ) = 1.0108964 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_1 * ||x||_1 ) = 0.0245358 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_oo * ||x||_oo ) = 0.0059277 ...... PASSED
============================================================================
T/V N NB P Q Time Gflops
----------------------------------------------------------------------------
W11R2C8 1000 64 1 2 0.37 1.807e+00
----------------------------------------------------------------------------
||Ax-b||_oo / ( eps * ||A||_1 * N ) = 1.0525457 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_1 * ||x||_1 ) = 0.0255467 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_oo * ||x||_oo ) = 0.0061719 ...... PASSED
============================================================================
T/V N NB P Q Time Gflops
----------------------------------------------------------------------------
W11R2R8 1000 64 1 2 0.39 1.692e+00
----------------------------------------------------------------------------
||Ax-b||_oo / ( eps * ||A||_1 * N ) = 1.0908244 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_1 * ||x||_1 ) = 0.0264758 ...... PASSED
||Ax-b||_oo / ( eps * ||A||_oo * ||x||_oo ) = 0.0063964 ...... PASSED
============================================================================
Finished 3 tests with the following results:
3 tests completed and passed residual checks,
0 tests completed and failed residual checks,
0 tests skipped because of illegal input values.
For this outputs could you please tell me what is the performance. Also tell
me what is this message "Warning: No xauth data; using fake authentication
data for X11 forwarding".
Regards,
Rajiv
----- Original Message -----
From: "Rajiv" <jrajiv at hclinsys.com>
To: <mwill at penguincomputing.com>; <beowulf at beowulf.org>
Sent: Thursday, July 29, 2004 1:53 PM
Subject: Re: [Beowulf] Benchmarking?
> Dear Michael,
> I have installed HPL and is working fine. After executing
> $ /opt/mpich/gnu/bin/mpirun -nolocal -np 4 -machinefile machines
> /opt/hpl/gnu/bin/xhpl
>
> I get three results. What are those results. Can I say the maximum among
> these three result (in GFLOPS) is the performance of the cluster.
>
> Regards,
> Rajiv
>
> ----- Original Message -----
> From: "Michael Will" <mwill at penguincomputing.com>
> To: <beowulf at beowulf.org>
> Sent: Thursday, July 29, 2004 2:13 AM
> Subject: Re: [Beowulf] Benchmarking?
>
>
> > description and link for download on
http://www.netlib.org/benchmark/hpl/
> >
> > Michael
> > On Wednesday 28 July 2004 11:57 am, Jack C wrote:
> > > I was just told about linpack, and that it was good. And apperantly
> there is
> > > an MPI implementation thereof, but I sure can't find it... the MPI
> standard
> > > site is not very informative. :(
> > >
> > > Anyone know where to find that, or any other good ones?
> > >
> > > Thanks again,
> > >
> > > -Jack C
> > > http://www.CREPinc.com
> > > _______________________________________________
> > > Beowulf mailing list, Beowulf at beowulf.org
> > > To change your subscription (digest mode or unsubscribe) visit
> http://www.beowulf.org/mailman/listinfo/beowulf
> > >
> >
> > --
> > Michael Will, Linux Sales Engineer
> > NEWS: We have moved to a larger iceberg :-)
> > NEWS: 300 California St., San Francisco, CA.
> > Tel: 415-954-2822 Toll Free: 888-PENGUIN
> > Fax: 415-954-2899
> > www.penguincomputing.com
> >
> > _______________________________________________
> > Beowulf mailing list, Beowulf at beowulf.org
> > To change your subscription (digest mode or unsubscribe) visit
> http://www.beowulf.org/mailman/listinfo/beowulf
>
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
-------------- next part --------------
A non-text attachment was scrubbed...
Name: HPL.dat
Type: application/octet-stream
Size: 1039 bytes
Desc: not available
URL: <http://www.beowulf.org/pipermail/beowulf/attachments/20040803/eab79c7a/attachment.obj>
More information about the Beowulf
mailing list