UPS recommendations

M A Suzen mehmet.suzen at bristol.ac.uk
Wed Nov 13 11:11:32 PST 2002


Sorry URL should be;
http://www.apcc.com/products/family/index.cfm?id=164

--On 13 November 2002 12:33pm -0500 Dan Christensen <jdc at uwo.ca> wrote:

> We're in the planning stages for preparing a room to house a small
> cluster, consisting of roughly 8 to 10 dual-cpu nodes to begin with.
> We are planning to use two or three 20A 120V circuits.  (Two should be
> enough, but three will give us room for future expansion.)
>
> We are wondering what kind of UPS to get.  Is it standard to get
> one UPS per circuit, or are there affordable UPS units that will
> manage several circuits?  ("Affordable" is a key word.)  Most outages
> are short, so we just need between 30 and 60 minutes of battery
> backup.  Also, I've heard that some UPS's can monitor the room
> temperature and shut down the machines if it gets too hot.  This
> would be useful.
>
> So, any advice about what we should get?
>
> I'm also curious about monitoring the UPS's.  If there are several
> of them, does one usually monitor all of them using the head node,
> or split this task up?
>
> Thanks,
>
> Dan
>
> --
> Dan Christensen
> jdc at uwo.ca
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit
> http://www.beowulf.org/mailman/listinfo/beowulf
>





More information about the Beowulf mailing list