a couple of questions

Keith Underwood keithu@parl.clemson.edu
Wed Dec 15 22:00:10 1999


We just brought up a few machines and a switch using the GNIC-II cards.
At first, I was using Don's driver from cesdis.gsfc.nasa.gov (v0.11) but I
had some serious trouble with one of the machines spewing this message:

eth1: Hamachi transmit timed out, status 00003803, resetting...
  Rx ring cffda000:  0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000 0000d000
0000d000 0000f000
  Tx ring cffda400:  4000 4000 4000 4000 4000 4000 4000 4000 4000 4000
4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000
4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000
4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000
4000 4000 4000 4000 4000 4000 4000 4000 7000

So... off to the mailing list I went...  Got Eric's driver (v0.14) and
this problem seems to have cleared up, but ping latency has gone up?  I
know that ping is not the worlds best latency measure, but going from 0.1
to 0.3 ms consistently?  of course, ttcp  now reports 38104 KB/s instead
of ~35000 KB/s...  

So... the questions are:

1) Which driver should be "better"?
2) Is there some user parameter that I should attempt to tweak to improve
the latency issue? (haven't really looked through the source yet)
3) Is anyone actively supporting/improving this driver, or has it sort of
fallen by the wayside since Alcatel canned the card?

Oh, almost forgot... machine configuration:

Dual PIII 450 MHz
Matrox G200
3Com 3C905B
256 MB Memory
10 GB EIDE disk


					Thanks,
					Keith Underwood
					Clemson University

 | To unsubscribe, send mail to Majordomo@cesdis.gsfc.nasa.gov, and within the
 |  body of the mail, include only the text:
 |   unsubscribe this-list-name youraddress@wherever.org
 | You will be unsubscribed as speedily as possible.