[vortex] problems w/3c59x on 3CCFE575BT

[Donald Becker]

On Sun, 22 Dec 2002, dean gaudet wrote:

> i had to re-enable cardbus support in the kernel and futz with a few
> other things, but here's what i get after "modprobe 3c59x":
> 
> pci-scan.c:v1.11 8/31/2002  Donald Becker <becker@scyld.com> http://www.scyld.com/linux/drivers.html
> 3c59x.c:v0.99Xf 11/17/2002 Donald Becker, becker@scyld.com
>   http://www.scyld.com/network/vortex.html
> eth0: 3Com 3CCFE575BT Cyclone CardBus at 0x4800,  00:50:04:b4:e7:29, IRQ 11
> eth0: CardBus functions mapped 10c00080->ca838080.
>   8K buffer 5:3 Rx:Tx split, autoselect/10baseT interface.
>   MII transceiver found at address 0, status 282d.
>   Using bus-master transmits and whole-frame receives.

OK, that looks fine.  What does 'mii-diag' report about the link?


-- 
Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Scyld Beowulf cluster system
Annapolis MD 21403			410-990-9993