[vortex] 3c905C Tornado RX errors

[Morten Holm]

Hi,

My 3c905C Tornado card gets many errors when receiving data:

# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:01:02:17:41:61
          inet addr:192.168.2.3  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:18569 errors:158 dropped:0 overruns:0 frame:160
          TX packets:7519 errors:0 dropped:0 overruns:0 carrier:0
          collisions:1231 txqueuelen:100
          RX bytes:27272140 (26.0 Mb)  TX bytes:546080 (533.2 Kb)
          Interrupt:11 Base address:0x8800

# mii-diag
Using the default interface 'eth0'.
Basic registers of MII PHY #24:  1000 782d 0040 6176 05e1 45e1 0003 0000.
 The autonegotiated capability is 01e0.
The autonegotiated media type is 100baseTx-FD.
 Basic mode control register 0x1000: Auto-negotiation enabled.
 You have link beat, and everything is working OK.
 Your link partner advertised 45e1: Flow-control 100baseTx-FD 100baseTx 10baseT-FD 10baseT, w/ 802.3X flow control.
   End of basic transceiver information.

Where to go from here?

Morten