[tulip] (no subject)

[azafar]

After configuring a DLINK DFE-570TX four port card using tulip driver version 
0.92pb with Red Hat 7.0 (Kernel 2.2.16-22), I get the following error shortly 
after adding load to the NIC "Too much work during an interrupt, 
csr5=0xf0630040". Error repeats about 10 times every time it appears.Problem 
occurs at random intervals and appears to be related to network load. I 
attempted the fix "mii-diag eth2 -G 0x8b240000" but did not see any change in 
the error. Any ideas on the cause of this problem and how to resolve it would 
be appreciated.....