[tulip] ana-6944

Ben Greear greearb@candelatech.com
Sat, 29 Sep 2001 15:19:39 -0700


> Marius Lindh wrote:
> 
> Hello guys!
> 
> I'm having some troubles with my adaptec ana-6944a/tx card using tulip and 2.2.19. I get the card up running with all fourports, and are able to define ips to all eth
> (eth0-eth3). But, the trouble is, that when I use the differents ips, all of them are going to the eth i started first. (Both in and out). Check out if they used the same mac
> address, and it did (to different ip's). When I run ifconfig, the different ip gots different mac-addreses..
> 
> Anyone got any good ideas? Please ;-)
> 
> - Marius Lindh

Try using ping with the -I option too specify the right port and see
if that works.  If it does, then you may need to turn on arp_filter
and/or fix your routing...

Ben

-- 
Ben Greear <greearb@candelatech.com>          <Ben_Greear@excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear