[tulip] Errors using 0.92wax tulip driver on Conexant

Rene Klootwijk rene.klootwijk@rencon.nl
Wed, 8 Aug 2001 14:04:52 +0200


When I use the 0.92wax release of the drivers on a Conexant LanFinity NIC I 
get the following error message after a while:

kernel: eth0: PCI Fatal Bus Error, f46ea000.

Also when downloading several files concurrently I get the following error 
messages repeatedly:
kernel: eth0: Too much work during an interrupt, csr5=
kernel: eth0: Restarted Rx at 11565 / 11565.
kernel: eth0: Too much work during an interrupt, csr5=
kernel: eth0: Restarted Rx at 11597 / 11597.
kernel: eth0: Too much work during an interrupt, csr5=
kernel: eth0: Restarted Rx at 11629 / 11629.
kernel: eth0: Too much work during an interrupt, csr5=
kernel: eth0: Restarted Rx at 11661 / 11661.
kernel: eth0: Too much work during an interrupt, csr5=
kernel: eth0: Restarted Rx at 11693 / 11693.

--
Rene