[realtek] RTL8100B Sinetic

[Orlando Andico]

here are my boot messages (yes, apologies for being so disjointed):

eepro100.c:v1.25 8/27/2002 Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/eepro100.html
eth0: Intel Pro/100 V Network at 0xd0908000, 00:0A:12:00:00:05, IRQ 10.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
rtl8139.c:v1.20a 7/24/2002 Donald Becker, becker@scyld.com.
 http://www.scyld.com/network/rtl8139.html
eth1: RealTek RTL8139C Fast Ethernet at 0xc000, IRQ 11, 00:0a:12:01:00:05.
eth1: Transmit timeout, status 0d 0004 media 10.
eth1: RTL8139 Interrupt line blocked, status 4.
eth1: Tx queue start entry 4  dirty entry 0, full.
eth1:  Tx descriptor 0 is 0008a03c. (queue head)
eth1:  Tx descriptor 1 is 0008a03c.
eth1:  Tx descriptor 2 is 0008a03c.
eth1:  Tx descriptor 3 is 0008a03c.
eth1: MII #32 registers are: 2100 780d 0000 0000 01e1 0000 0000 0000.


---
Orlando Andico <orly@mozcom.com>
Mosaic Communications, Inc.