[realtek] 8139 & kernel 2.4.6 & unexpected IRQ trap
Philipp Stucke
philipp.stucke@t-online.de
Sun, 08 Jul 2001 22:53:58 +0200
This is a multi-part message in MIME format.
--------------080600010100050009050809
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Hi!
Situation is: I'm having a Realtek 8139 chipset on a D-LINK network card.
I had no problems running this card with linux kernel 2.2.x.
Now, with 2.4.x it does not work.
I tried 2.4.5, 2.4.6, and the latest driver from sourceforge.net/gkernel/
Whenever I try to insmod, I'm getting following error messages:
kernel: 8139too Fast Ethernet driver 0.9.18
kernel: PCI: Found IRQ 5 for device 00:0b.0
kernel: Assertion failed! ioaddr != NULL,8139too.c, rtl8139_init_one,
line=943
kernel: eth1: Real Tek RTL8139 Fast Ethernet at 0x6c00,
ff:5f:11:00:57:00, IRQ 5
When trying to ifconfig eth1 up, I'm getting "unexpected IRQ trap at
vektor 40" and
"unexpected IRQ trap at vektor 41" and then, system freezes.
I've appended lspci.txt witch is lspci output, and rtl-diag, which is
the output of the
diagnostic program.
I hope you can help me. I'm pretty new to kernel/driver problems at this
level, so
if you need more informations, I'm glad to supply them.
Regards, Philipp
--------------080600010100050009050809
Content-Type: text/plain;
name="rtl-diag.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="rtl-diag.txt"
rtl8139-diag.c:v2.01 1/8/2001 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a RealTek RTL8139 adapter at 0x6c00.
RealTek chip registers at 0x6c00
0x000: 2dbf5000 0000414e 80004100 00000000 00002000 00002000 00002000 00002000
0x020: 00f9d000 00f9d800 00f9c000 00f96800 00f91000 01000000 0000fff0 00000000
0x040: 74000000 00000000 90c7a2b9 00000000 000d14c6 00000000 0088e11c 00100000
0x060: 1000000f 01e17809 00000000 00000000 00000004 000f73c0 b0f243b9 7a36d743.
No interrupt sources are pending.
The chip configuration is 0x14 0x0d, MII half-duplex mode.
EEPROM size test returned 6, 0x204a4 / 0x2.
Parsing the EEPROM of a RealTek chip:
PCI IDs -- Vendor 0x10ec, Device 0x8139, Subsystem 0x1113.
PCI timer settings -- minimum grant 32, maximum latency 64.
General purpose pins -- direction 0xe1 value 0x12.
Station Address 00:50:BF:2D:4E:41.
Configuration register 0/1 -- 0x0d / 0xc2.
EEPROM active region checksum is 0869.
EEPROM contents:
8129 10ec 8139 1113 ec01 4020 e112 5000
2dbf 414e 0d14 f7c2 8801 43b9 b0f2 071a
df43 8a36 df43 8a36 43b9 b0f2 1111 1111
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
The word-wide EEPROM checksum is 0x62fc.
--------------080600010100050009050809
Content-Type: text/plain;
name="lspci.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="lspci.txt"
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e7ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at 6400 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 6800 [size=128]
Region 1: Memory at ea001000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at e8000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Accton Technology Corporation: Unknown device ec01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 6c00 [size=256]
Region 1: Memory at ea000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at e9000000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c810 (rev 23)
Subsystem: Symbios Logic Inc. (formerly NCR) 8100S
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 7000 [size=256]
Region 1: Memory at ea002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev 01)
Subsystem: ESS Technology Solo-1 Audio Adapter
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 7400 [size=64]
Region 1: I/O ports at 7800 [size=16]
Region 2: I/O ports at 7c00 [size=16]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 8400 [size=4]
Capabilities: [c0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Riva TnT2 [NV5] (rev 11) (prog-if 00 [VGA])
Subsystem: Elsa AG: Unknown device 0c28
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
--------------080600010100050009050809--