[realtek] ISA irqs (scanned) = 3,4,5 PCI status changes.

Marco Dubbeld dubbeld@zeelandnet.nl
Thu, 7 Sep 2000 09:32:43 +0200


I've tried to get my Compx readylink TX32A uo and runningbut without success.

In proc pci the device is reported
PCI devices found:
  Bus 32, device   0, function  0:
    Ethernet controller: Realtek Unknown device (rev 16).
      Vendor id=10ec. Device id=8138.
      Medium devsel.  Fast back-to-back capable.
  Bus  0, device   4, function  0:
    CardBus bridge: Texas Instruments Unknown device (rev 2).
      Vendor id=104c. Device id=ac17.
      Medium devsel.  IRQ 11.  Master Capable.  Latency=168.  Min Gnt=128.Max Lat=6.
      Non-prefetchable 32 bit memory at 0x68000000 [0x68000000].
  Bus  0, device   4, function  1:
    CardBus bridge: Texas Instruments Unknown device (rev 2).
      Vendor id=104c. Device id=ac17.
      Medium devsel.  IRQ 11.  Master Capable.  Latency=168.  Min Gnt=192.Max Lat=7.
      Non-prefetchable 32 bit memory at 0x68001000 [0x68001000].

So I tried with "cb_enabler", "pci-scan", cb_shim", "realtek_cb"
After card insertion they do get loaded:

Module                  Size  Used by 
realtek_cb             11920   0  (unused) 
cb_shim                 2564   0  (unused) 
pci-scan                2384   0 [cb_shim] 
cb_enabler              2280   1  [realtek_cb cb_shim] 
ds                      6284   2  [cb_enabler]         
i82365                 22780   2
pcmcia_core            51392   0  [cb_enabler ds i82365]
vfat                   11004   0  (unused)
fat                    32640   0  [vfat]     

Maybe are the startup messages usefull?

Linux PCMCIA Card Services 3.1.19
  kernel build: 2.2.14-15mdk #1 Tue Jan 4 22:24:20 CET 2000
  options:  [pci] [cardbus] [apm] [pnp]
PCI routing table version 1.0 at 0xfdf80
PnP: PNP BIOS installation structure at 0xc00f6780
PnP: PNP BIOS version 1.0, entry at f0000:b31a, dseg at 400
Intel PCIC probe:
  TI 1220 rev 02 PCI-to-CardBus at slot 00:04, mem 0x68000000
    host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 168/176] [bus 32/34]
    host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 168/176] [bus 35/37]
    ISA irqs (scanned) = 3,4,5 PCI status changes
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8138
cb_shim.c:v1.00 4/15/2000  Donald Becker <becker@scyld.com>
 http://www.scyld.com/linux/drivers.html
rtl8139.c:v1.10 5/29/2000 Donald Becker, becker@scyld.com.
 http://www.scyld.com/network/rtl8139.html  

My /proc/interrupts shows
           CPU0
  0:    9735106          XT-PIC  timer
  1:      23588          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  8:          5          XT-PIC  rtc
 11:         28          XT-PIC  i82365
 12:     143202          XT-PIC  PS/2 Mouse
 13:          1          XT-PIC  fpu
 14:     162619          XT-PIC  ide0
 15:          4          XT-PIC  ide1
NMI:          0   

Should I have seen an entry like????:
	3:	xxxxxx	XT-PIC  realtek_cb

If I ifconfig eth0 then I get.
eth0: error fetching interface information: Device not found  

If I look in /var/log/messages I see:
Sep  7 07:53:38 lapmar kernel: rtl8139.c:v1.10 5/29/2000 Donald Becker, becker@scyld.com.
Sep  7 07:53:38 lapmar kernel:  http://www.scyld.com/network/rtl8139.html
Sep  7 07:53:40 lapmar cardmgr[4138]: get dev info on socket 0 failed: Bron tijdelijk niet beschikbaar 

Bron tijdelijk niet beschikbaar => Resouorce temporary not available.

Can anybody tell me what is wrong??


Many thanks in advance....



-- 
Marco Dubbeld
email: dubbeld@zeelandnet.nl