[eepro100] Next Problem with eepro100

Infinity2 infinity2@lock-net.com
Mon, 8 Jan 2001 19:41:49 -0500


I too did an eepro100-diag and the results are below.  This is done while
the NIC is "working".  I'll try to get one when it stops.  I have done all
the security and bug updates I can find on RH's website.  I'll see when it
craps out again.  Thanks!

Rob Spurlock

[root@NS1 /root]# ./eepro100-diag -Dvvfmaaee
eepro100-diag.c:v2.02 7/19/2000 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a Intel i82562 EEPro100 adapter at 0xdf00.
i82557 chip registers at 0xdf00:
  0c000050 07eae800 00000000 00080002 18250021 00000600
  No interrupt sources are pending.
   The transmit unit state is 'Suspended'.
   The receive unit state is 'Ready'.
  This status is normal for an activated but idle interface.
 The Command register has an unprocessed command 0c00(?!).
EEPROM size probe returned 0xff80c03, 6 bit address.
EEPROM contents, size 64x16:
    00: 0300 1947 a4c0 1a03 0000 0201 4701 0000
  0x08: 0000 0000 49b2 3013 8086 007f ffff ffff
  0x10: ffff ffff ffff ffff ffff ffff ffff ffff
  0x18: ffff ffff ffff ffff ffff ffff ffff ffff
  0x20: ffff ffff ffff ffff ffff ffff ffff ffff
  0x28: ffff ffff ffff ffff ffff ffff ffff ffff
  0x30: 0000 ffff ffff ffff ffff ffff ffff ffff
  0x38: ffff ffff ffff 0000 ffff ffff ffff 9c13
 The EEPROM checksum is correct.
Intel EtherExpress Pro 10/100 EEPROM contents:
  Station address 00:03:47:19:C0:A4.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
 MII PHY #1 transceiver registers:
  3100 782d 02a8 0330 05e1 0021 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  2404 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0010 0000 0000 0000.


----- Original Message -----
From: "Eric Fikus" <eric@fikus.staticky.com>
To: <eepro100@scyld.com>
Sent: Monday, January 08, 2001 5:38 AM
Subject: Re: [eepro100] Next Problem with eepro100


> This is the ouput of 'eepro100-diag -Dvvfmaaee' after a wait_for_cmd_done
timeout message:
>
> eepro100-diag.c:v2.02 7/19/2000 Donald Becker (becker@scyld.com)
>  http://www.scyld.com/diag/index.html
> Index #1: Found a Intel i82562 EEPro100 adapter at 0xdf00.
> i82557 chip registers at 0xdf00:
>   0cf00050 00fe0000 00000000 00080002 18250000 00000600
>   No interrupt sources are pending.
>    The transmit unit state is 'Suspended'.
>    The receive unit state is 'Ready'.
>   This status is normal for an activated but idle interface.
>  The Command register has an unprocessed command 0cf0(?!).
> EEPROM size probe returned 0xff80c03, 6 bit address.
> EEPROM contents, size 64x16:
>     00: 0300 3e47 518c 1a03 0000 0201 4701 0000
>   0x08: 0000 0000 49b2 3013 8086 007f ffff ffff
>   0x10: ffff ffff ffff ffff ffff ffff ffff ffff
>   0x18: ffff ffff ffff ffff ffff ffff ffff ffff
>   0x20: ffff ffff ffff ffff ffff ffff ffff ffff
>   0x28: ffff ffff ffff ffff ffff ffff ffff ffff
>   0x30: 0000 ffff ffff ffff ffff ffff ffff ffff
>   0x38: ffff ffff ffff 0000 ffff ffff ffff ca47
>  The EEPROM checksum is correct.
> Intel EtherExpress Pro 10/100 EEPROM contents:
>   Station address 00:03:47:3E:8C:51.
>   Board assembly 000000-000, Physical connectors present: RJ45
>   Primary interface chip i82555 PHY #1.
>
> Thanks,
> Eric Fikus
>
> On Sun, Jan 07, 2001 at 03:19:35AM -0700, Eric Fikus wrote:
> > I am having a similar problem with kernels 2.2.18 and 2.4.0 with red hat
7.  I periodically get messages like:
> >
> > eepro100: wait_for_cmd_done timeout!
> > last message repeated 25 times
> > kernel: NETDEV WATCHDOG: eth0: transmit timed out
> > kernel: eth0: Transmit timed out: status 0050  0cf0 at 3244/3272 command
000c0000.
> >
> > After about a minute everything starts working again.  Doing ifdown/ifup
eth0 also fixes the problem.
> >
> > I'm currently using the driver include with 2.4.0:
> > eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> > eepro100.c: $Revision: 1.35 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw@saw.sw.com.sg> and others
> >
> > Thanks in advance for any help.
> >
> > Eric Fikus
> >
> > _______________________________________________
> > eepro100 mailing list
> > eepro100@scyld.com
> > http://www.scyld.com/mailman/listinfo/eepro100
>
> _______________________________________________
> eepro100 mailing list
> eepro100@scyld.com
> http://www.scyld.com/mailman/listinfo/eepro100