Problem uploading data to a linux host with eepro100+

=?iso-8859-1?Q?Magnus_N=E4slund?= mag@bahnhof.se
Mon Jan 24 22:06:54 2000


Thanks for the swift reply!
I never have nil preformance, but close to ...
I've tried to down/up the interface, but that doesn't help.
I've tried to different modes (10/100 FD/no duplex), nothing helps...
I will try the diag program and send this list the results if they are
weird...

I will later try some other old hubs i have lying around, so far i'v only
tried 3com 10/100 auto switches...

Cheers!

/Magnus


----- Original Message -----
From: "Stauffer Walter" <stauffer@galenica.ch>
To: <linux-eepro100@beowulf.gsfc.nasa.gov>
Sent: Monday, January 24, 2000 19:32
Subject: RE: Problem uploading data to a linux host with eepro100+


> Magnus,
>
> things to check:
>
>  - auto-detect of 10/100 Mbit/s and Hdx/Fdx may fail
>    (with certain combinations of NIC / cabling / hub)
>    the driver takes params to fix rate and mode
>
>  - can you *reliably* ping your system *while it is quiet* ?
>
>  - try eepro-diag. I have a few NIC's on which eepro-diag
>    (most of the time) gives me the following:
>
> eepro100-diag.c:v1.01 7/8/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
> Index #1: Found a Intel 82557 EtherExpressPro100B adapter at 0xf800.
> i82557 chip registers at 0xf800:
>   00000000 00000000 00000000 00080002 14378462 00000000
>   No interrupt sources are pending.
>    The transmit unit state is 'Idle'.
>    The receive unit state is 'Idle'.
>   This status is unusual for an activated interface.
>
> In addition to being "unusual", performance of the NIC is
> between lousy and nil in this state. Can be recovered for
> some time by ifconfig down / ifconfig up ...
> (not really the solution IMHO)
>
> Best regards,
> Walter
>
>
> >Hello i'm a newcomer to this list, i don't know what has been >said
> earlier,
> >and so on, and so on.
> >But if i'm making a fool out of my self, i'm sure you all will >tell me
:)
> >
> >I have a (GNU/)Linux system that is running kernels  2.2.13,2.2.14 and
> >sometimes 2.3.40.
> >The problem seems to be _uploading_ to the host.
> >I get about 8 kb/s on a 100mbit net (!) at first, then it slowly climbs
up
> >to about 30-40 kb/s.
> >I have tried to use the debug=3 module option, changed between >the three
> >kernels, changed ethernet card to an excactly same model/brand >(bought 5
> of
> >them together), and i've not seen any messages of any kind, i >just get
> that
> >lousy rate.
> >Yes, i've switched cables, but with no success....
> >When i download from the host i get more speed (~300kb/s) but >that still
> >sucks!
>
> >Has ANYONE seen this kinda behaviour, and most important -does >anyonw
know
> >what i can try/patch to get things spinning?
> >Please recommend me stuff to try/do!
> >
> >/magnus näslund...
> -------------------------------------------------------------------
> To unsubscribe send a message body containing "unsubscribe"
> to linux-eepro100-request@beowulf.org

-------------------------------------------------------------------
To unsubscribe send a message body containing "unsubscribe"
to linux-eepro100-request@beowulf.org