Pro100 transmit timeout

Dale Van Beveren dvanbeve@grli.com
Wed Nov 3 10:05:50 1999


I've seen a few other people around with these symptoms, is any solution as
how to fix it? The nic came with a Dell 4300 server this past April. I'm
running a 2.2.10 kernel with the driver compiled into the kernel.



Nov  1 08:28:09 freedom kernel: eepro100.c:v1.09j 7/27/99 Donald Becker
http://c
esdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Nov  1 08:28:09 freedom kernel: eth0: OEM i82557/i82558 10/100 Ethernet at
0xe00
02000, 00:90:27:62:69:81, IRQ 14.
Nov  1 08:28:09 freedom kernel:   Board assembly 697680-002, Physical
connectors
 present: RJ45
Nov  1 08:28:09 freedom kernel:   Primary interface chip i82555 PHY #1.
Nov  1 08:28:09 freedom kernel:   General self-test: passed.
Nov  1 08:28:09 freedom kernel:   Serial sub-system self-test: passed.
Nov  1 08:28:09 freedom kernel:   Internal registers self-test: passed.
Nov  1 08:28:09 freedom kernel:   ROM checksum self-test: passed
(0x24c9f043).
Nov  1 08:28:09 freedom kernel:   Receiver lock-up workaround activated.
Nov  1 09:50:11 freedom kernel: eth0: Transmit timed out: status 0050  0070
at 1
30997/131009 command 000c0000.
Nov  1 09:50:11 freedom kernel: eth0: Trying to restart the transmitter...
Nov  1 09:50:33 freedom kernel: eth0: Transmit timed out: status 0050  0000
at 1
66146/166158 command 000c0000.
Nov  1 09:50:33 freedom kernel: eth0: Trying to restart the transmitter...
Nov  1 09:50:41 freedom kernel: eth0: Transmit timed out: status 0050  0000
at 1
67386/167398 command 000c0000.
Nov  1 09:50:41 freedom kernel: eth0: Trying to restart the transmitter...


Thanks
dvanbeve@grli.com