Emulex LP8K_V2 FC SCSI install

[Jose Celestino]

Hi, anyone with experience in installing the Emulex LP8K_V2 fibre
channet SCSI controler on linux?

I'm unable to get the two devices (partitions configured on the
StorageWorks).

The driver compiles ok and I load it with

insmod lpfcdd lpfc_topology=0x04 lpfc_log_verbose=0xFF

with the following output:

scsi0 : Emulex LPFC (LP8000) SCSI on PCI bus 03 device 30 irq 5
!lpfc0:017:FIND node scsid  mapped  Data: f755dc40 11200 200 6009200
!lpfc0:038:FCP command failed  Data: 0 4 1a0002 1aa29b17
!lpfc0:038:FCP command failed  Data: 11200 0 0 12
!lpfc0:038:FCP command failed: RSP  Data: 80000 4000000 0 0
!lpfc0:129:FCP Read Underrun:  Data: 1aa29b17 1a 4 4
!lpfc0:129:FCP RESID UNDER PARTIAL:  Data: 12 0 100 4
!lpfc0:017:FIND node scsid  mapped  Data: f755dbc0 11000 200 6009201
!lpfc0:038:FCP command failed  Data: 0 4 1c0004 1aa29b17
!lpfc0:038:FCP command failed  Data: 11000 1 0 12
!lpfc0:038:FCP command failed: RSP  Data: 80000 4000000 0 0
!lpfc0:129:FCP Read Underrun:  Data: 1aa29b17 1c 4 4
!lpfc0:129:FCP RESID UNDER PARTIAL:  Data: 12 0 100 4
!lpfc0:017:FIND node scsid NOT FOUND  Data: 2 1 0 0
!lpfc0:017:FIND node scsid NOT FOUND  Data: 3 1 0 0
!lpfc0:017:FIND node scsid NOT FOUND  Data: 4 1 0 0
!lpfc0:017:FIND node scsid NOT FOUND  Data: 5 1 0 0
!lpfc0:017:FIND node scsid NOT FOUND  Data: 6 1 0 0
[...]

Moreover I get:

~/SourceBuild# cat /proc/scsi/scsi
Attached devices: none
~/SourceBuild# cat /proc/scsi/lpfc/0
Emulex LPFC (LP8000) SCSI on PCI bus 03 device 30 irq 5

But no devices whatever.

I have also heard of a Compaq driver for this board, where can I get it?
And is there any detailed info on the install that I can look at? (other
than the one at the Emulex site)

TIA.

-- 
Jose Celestino <japc at co.sapo.pt>
--------------------------------------------
"Lately, the only thing keeping me from becoming a serial killer is my
distaste for manual labor."        -- Dilbert