Typical hardware

Tue Mar 6 07:00:47 PST 2001

For truly minimalist approach to building beowulfs see

http://www.clustercompute.com

One could make them diskless with several boards per power supply 

Marcin

----------------------------------------------------------------------------
--
High Performance Computing Group             Coordination Office    
Institute for Information Technology         C3.ca Association    
National Research Council of Canada

Rm 286, M-50, 1500 Montreal Road             tel 613-998-7749
Ottawa, Canada                               fax 613-998-5400
K1A 0R6                                      e-mail
Marcin.Kolbuszewski at nrc.ca

-----Original Message-----
From: JParker at coinstar.com [mailto:JParker at coinstar.com]
Sent: Monday, March 05, 2001 1:06 PM
To: Carpenter, Dean
Cc: beowulf at beowulf.org; beowulf-admin at beowulf.org;
'gaborb at athomepc.net'
Subject: Re: Typical hardware

G'Day !

I work for a vending machine type company.  Our solution was too build
aluminum
cases out of sheet metal (13" w x 6-1/2" h x 11" d).  No thrills (no floppy,
cd,
etc), just bare minimum of what you need (size was determined so we can use
generic expansion boards).  Still have to deal with a power supply for each
node, but is is reasonably compact package (hd screwed into sheet metal
wall).
It is also easy to build with ~.100" aluminum sheet, a bender and rivets.
An
added benefit is that you can standardize on screw sizes and threads so you
spare part kits becomes very minimal.

You can also build larger cases to handle multiple harddrives etc.  Our
latest
version has a cd.  We increased the height slightly and put a screwed a
shelf
in.  It would very easy to change dimensions for any hardware configuration
you
can think of.

Think home built rack-mount cases ....

cheers,
Jim Parker

Sailboat racing is not a matter of life and death ....  It is far more
important
than that !!!

                    "Carpenter, Dean"

                    <Dean.Carpenter at p        To:     beowulf at beowulf.org

                    harma.com>               cc:     "'gaborb at athomepc.net'"
<gaborb at athomepc.net>                                    
                    Sent by:                 Subject:     Typical hardware

                    beowulf-admin at beo

                    wulf.org

                    03/05/01 08:53 AM

We're just now beginning to mess around with clustering - initial
proof-of-concept for the local code and so on.  So far so good, using spare
equipment we have lying around, or on eval.

Next step is to use some "real" hardware, so we can get a sense of the
throughput benefit.  For example, right now it's a mishmosh of hardware
running on a 3Com Switch 1000, 100m to the head node, and 10m to the slaves.
The throughput one will be with 100m switched all around, possibly with a
gig uplink to the head node.

Based on this, we hunt for money for the production cluster(s) ...

What hardware are people using ?  I've done a lot of poking around at the
various clusters linked to off beowulf.org, and seen mainly two types :

1.  Commodity white boxes, perhaps commercial ones - typical desktop type
cases.  These take up a chunk of real estate, and give no more than 2 cpus
per box.  Lots of power supplies, shelf space, noise, space etc etc.

2.  1U or 2U rackmount boxes.  Better space utilization, still 2 cpus per
box, but costing a whole lot more $$$.

We, like most out there I'm sure, are constrained, by money and by space.
We need to get lots of cpus in as small a space as possible.  Lots of 1U
VA-Linux or SGI boxes would be very cool, but would drain the coffers way
too quickly.  Generic motherboards in clone cases is cheap, but takes up too
much room.

So, a colleague and I are working on a cheap and high-density 1U node.  So
far it looks like we'll be able to get two dual-CPU (P3) motherboards per 1U
chassis, with associated dual-10/100, floppy, CD and one hard drive.  And
one PCI slot.  Although it would be nice to have several Ultra160 scsi
drives in raid, a generic cluster node (for our uses) will work fine with a
single large UDMA-100 ide drive.

That's 240 cpus per 60U rack.  We're still working on condensed power for
the rack, to simplify things.  Note that I said "for our uses" above.  Our
design goals here are density and $$$.  Hence some of the niceties are being
foresworn - things like hot-swap U160 scsi raid drives, das blinken lights
up front, etc.

So, what do you think ?  If there's interest, I'll keep you posted on our
progress.  If there's LOTS of interest, we may make a larger production run
to make these available to others.

--
Dean Carpenter
deano at areyes.com
dean.carpenter at pharma.com
dean.carpenter at purduepharma.com
94TT :)

_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf

_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf